Trade Price
£26,002.08
Per
1
Unit
EA
Pack Quantity
1
This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is ingress protection IP31 and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 60 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter achieves above standards performance THDi less or equal to 3%, is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum compensation of 3000A per CT set. Frame exterior dimensions are 800 millimetres in width, 500 millimetres in depth, 2100 millimetres in height and product weight 277 kg.
Range of product
AccuSine
Product name
AccuSine PCS+
Product or component type
Active harmonic filter
Network type
3P
Network configuration
3 or 4 wires
Network rated voltage
380…480 V AC
Network frequency
50/60 Hz +/- 3 Hz auto sensing
Maximum permissible voltage
1.1 x Un
Neutral correction
Not provided
RMS output current rating
60 A
Reactive power rating
50 kvar 480 V AC 50/60 Hz
Operating modes
Power factor correction Mains current balancing Harmonic cancellation
Installation location
Indoor
Enclosure mounting
Floor-standing
Protection type
Circuit breaker protection
Disconnect type
Door-interlocked with rotary handle
Interrupt capacity
200 kA
Heat dissipation
Rear plenum with forced ventilation for high heat flow
Electromagnetic compatibility
Conducted EMC, class A conforming to EN 61000-6-4
accessibility for operation
Front
Location of connection
Top or bottom
Enclosure degree of protection
IP31
Environmental characteristic
Operating: 3C2 conforming to IEC 60721-3-3 Operating: 3S2 conforming to IEC 60721-3-3 Storage: 3C3 conforming to IEC 60721-3-3 Storage: 3S3 conforming to IEC 60721-3-3
Operating altitude
<= 1000 m 1 % per 100 m
Ambient air temperature for operation
0…40 °C 0…50 °C maximum with current derating of 2 % per °C
Relative humidity
0…95 %
PCBA protection
Conformal coated
standards
CSA C22.2 No 14 EN 61000-6-4 EN 60439-1 CSA C22.2 No 60947-1-07 UL 508 UL 60947-1
product certifications
RCM CE cULus ABS
Ambient air temperature for storage
-20…60 °C
Net weight
234 kg
height
2100 mm
Width
800 mm
Colour
Light grey (RAL 7035)
Depth
500 mm
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
233.1 cm
Package 1 Width
119.4 cm
Package 1 Length
119.4 cm
Package 1 Weight
362.0 kg
Warranty
18 months
Datasheet