Trade Price
£73,412.52
Per
1
Unit
EA
Pack Quantity
1
This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing swift power factor correction and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is ingress protection IP31, and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 300 Amps. The enclosure is floor standing, allow cable entry from top or bottom and is delivered in RAL7035 light grey. This active power filter which achieves above standards performance is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum VAR injection of 2500 kVar either leading or lagging per current transformer set. Frame exterior dimensions are 900 millimetres in width, 600 millimetres in depth, 2100 millimetres in height and product weight 422 kg.
Range of product
AccuSine
Product name
AccuSine PFV+
Product or component type
Electronic VAR controller
Network type
3P
Network configuration
3 or 4 wires
Network rated voltage
380…480 V AC
Network frequency
50/60 Hz +/- 3 % auto-sensing
Maximum permissible voltage
1.1 x Un
RMS output current rating
300 A
Reactive power rating
249 kvar 480 V AC 50/60 Hz
Operating mode
Mains current balancing Volt-var support Power factor correction
Installation location
Indoor
Enclosure mounting
Floor-standing
Protection type
Circuit breaker protection
Disconnect type
Door-interlocked with rotary handle
Interrupt capacity
200 kA
Heat dissipation
Rear plenum with forced ventilation for high heat flow
Electromagnetic compatibility
Conducted EMC, class A conforming to EN 61000-6-4
accessibility for operation
Front
Location of connection
Top or bottom
Enclosure degree of protection
IP31
Environmental characteristic
Operating: 3C2 conforming to IEC 60721-3-3 Operating: 3S2 conforming to IEC 60721-3-3 Storage: 3C3 conforming to IEC 60721-3-3 Storage: 3S3 conforming to IEC 60721-3-3
Operating altitude
<= 1000 m 1 % per 100 m
Ambient air temperature for operation
0…40 °C 0…50 °C maximum with current derating of 2 % per °C
Relative humidity
0…95 %
PCBA protection
Conformal coated
standards
EN 60439-1 CSA C22.2 No 60947-1-07 EN 61000-6-4 UL 60947-1 UL 508 CSA C22.2 No 14
product certifications
ABS CE RCM cULus
Ambient air temperature for storage
-20…60 °C
Net weight
400 kg
height
2100 mm
Width
900 mm
Depth
600 mm
Colour
Light grey (RAL 7035)
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
233.1 cm
Package 1 Width
119.4 cm
Package 1 Length
119.4 cm
Package 1 Weight
513.0 kg
Warranty
18 months
Datasheet