Range of product

Modicon X80

range compatibility

Modicon M580

Product or component type

I/O expansion module

Device application

X80 Ethernet RIO drop adaptor

Product specific application

For remote I/O modules

Bus type

Bus X across the remote backplane Ethernet across the remote backplane

Number of port

3

Integrated connection type

1 port for service or distributed equipment 2 port for Ethernet RIO Network (RSTP)

Communication network type

IPv4 (internet protocol)

Communication port protocol

EtherNet/IP

Communication service

Ethernet/IP adapter RSTP (Ring topology support) Ethernet RIO network Quality of Service (QoS) CIP Explicit messaging (server) Modbus TCP server for module diagnostics DHCP client TFTP client FTP client FDR client NTP client SNTP client SNMP agent

Cybersecurity

Enable/disable communication ports Syslog protocol support

Connector type

3 RJ45

Exchange mode

Half duplex, full duplex, autonegotiation, auto MDIX

Transmission rate

10/100 Mbit/s

Port Ethernet

10/100BASE-TX

Function available

CCOTF (configuration change on the fly) Input data is collected and published to the remote I/O head adaptor Output modules are updated with the data received from remote I/O head adaptor Diagnostics for remote I/O devices (Device DDT) Port mirroring System time stamping Non-interfering type 1 I/O extension rack

data recording

10 ms time stamps

Topology

Ring

Local signalling

1 LED (green) for module active (RUN) 1 LED (red) for module error (ERR) 1 LED (green/red) for module status (Mod Status) 1 LED (green/red) for network communication status (Net Status) 1 LED (green) for Ethernet link diagnostics (STS)

Current consumption

1800 mA

Input voltage

3.3 V DC

Product compatibility

0…1024 discrete channel 0…256 analog channel counter module time-stamping module SSI encoder interface module motion control module frequency input module AS-Interface module serial link module fiber converter modules HART module weighing module CANopen master module (standalone CPU only) PROFIBUS module (standalone CPU only) Ethernet switch module

module format

Standard

Net weight

0.225 kg

Maximum altitude transport

3000 m

Relative humidity

95 % without condensation

Fixing mode

By screws

Mounting mode

Rack-mounted

Width

32 mm

height

100 mm

Depth

87.5 mm

Protective treatment

Conformal coating

Directives

2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive

Product certifications

CE UL CSA RCM EAC Merchant Navy ATEX zone 2/22 IECEx zone 2/22 Hazardous location class 1, division 2

Standards

EN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0 UL 121201 CSA C22.2 No 213

Environmental characteristic

Gas resistant class Gx conforming to ISA S71.04 Gas resistant class 3C4 conforming to IEC 60721-3-3 Dust resistant class 3S4 conforming to IEC 60721-3-3 Sand resistant class 3S4 conforming to IEC 60721-3-3 Salt resistant level 2 conforming to IEC 68252 Mold growth resistant class 3B2 conforming to IEC 60721-3-3 Fungal spore resistant class 3B2 conforming to IEC 60721-3-3

IP degree of protection

IP20

Ambient air temperature for operation

0…60 °C

Ambient air temperature for storage

-40…85 °C

Operating altitude

<= 2000 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

5.500 cm

Package 1 Width

11.000 cm

Package 1 Length

12.000 cm

Package 1 Weight

272.000 g

Unit Type of Package 2

S02

Number of Units in Package 2

15

Package 2 Height

15.000 cm

Package 2 Width

30.000 cm

Package 2 Length

40.000 cm

Package 2 Weight

4.398 kg

Warranty

18 months