50442

300mm dia Vigirex closed toroid (GA)

Trade Price

£770.75

Per

1

Unit

EA

Pack Quantity

1

50442

Information

This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 630A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 300 millimeters and the weight is 2.280kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 150 millimeters. The maximum cross section per phase (R, S, T, N) is 2 cables of 240mm² for a copper conductor.

Technical Specifications

Range

VigiPacT

Device short name

GA300

Product or component type

Earth leakage current sensor

Device application

Equipment monitoring and control

Range compatibility

VigiPacT RH10M residual current protection relay VigiPacT RH10P residual current protection relay VigiPacT RH21M residual current protection relay VigiPacT RH21P residual current protection relay VigiPacT RH68M residual current protection relay VigiPacT RH86M residual current protection relay VigiPacT RH86P residual current protection relay VigiPacT RH99M residual current protection relay VigiPacT RH99P residual current protection relay VigiPacT RH197M residual current protection relay VigiPacT RH197P residual current protection relay VigiPacT RHU residual current protection relay VigiPacT RHUs residual current protection relay VigiPacT RMH residual current protection relay

current sensor type

A type closed toroid

[Ie] rated operational current

630 A

Transformer ratio

1/1000

Network type

AC/DC

Network frequency

45...440 Hz

[Icw] rated short-time withstand current

85 kA for 0.5 s

Residual short-circuit withstand current

85 kA / 0.5 s conforming to IEC 60947-2

[Ui] rated insulation voltage

1000 V

Overvoltage category

IV

[Uimp] rated impulse withstand voltage

12 kV

Mounting mode

Fixed (cables)

Connections - terminals

Connection by clip 6.35 mm²

Diameter

291 mm inner:

Cable outer diameter

150 mm for 2 cables : 240 mm² (maximum)

Net weight

2.23 kg

Height

Outside: 360 mm

Width

390 mm

height

360 mm

Depth

46 mm

IP degree of protection

Connectors: IP20 IP30

Environmental characteristic

Exposure to damp heat not in service (25...55 °C, RH 95 %) : 28 cycles conforming to IEC 60068-2-30 Salt mist: Kb/2 conforming to IEC 60068-2-52 Exposure to damp heat in service: category C2: 48 hours conforming to IEC 60068-2-56

Pollution degree

Level 3 conforming to IEC 60664-1

Ambient air temperature for operation

-35…70 °C

Ambient air temperature for storage

-55…85 °C

standards

IEC 60947-2

product certifications

CE

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

5.4 cm

Package 1 Width

36.8 cm

Package 1 Length

40.2 cm

Package 1 Weight

2.152 kg

Unit Type of Package 2

S04

Number of Units in Package 2

5

Package 2 Height

30.0 cm

Package 2 Width

40.0 cm

Package 2 Length

60.0 cm

Package 2 Weight

11.526 kg

Warranty

18 months

Document Links

Catalogue page

Datasheet