ATS01N106FT

ATS01 6A Soft start 110-480V

Trade Price

POA

Per

1

Unit

EA

Pack Quantity

1

ATS01N106FT

Information

This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 3kW or 3hp for 3-phase (110V to 480V AC) and up to 0.75kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 22.5mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Technical Specifications

Range of product

Altistart 01

Product or component type

Soft starter

Product destination

Asynchronous motors

Product specific application

Simple machine

Device short name

ATS01

Network number of phases

1 phase

[Us] rated supply voltage

110...480 V - 10...10 %

Motor power kW

3 kW, 3 phases at 400 V 0.75 kW, 3 phases at 230 V 1.1 kW, 3 phases at 230 V 2.2 kW, 3 phases at 400 V 0.75 kW, 1 phase at 230 V

Motor power hp

1 hp, 3 phases at 230 V 2 hp, 3 phases at 460 V 3 hp, 3 phases at 460 V 0.5 hp, 3 phases at 210 V 1.5 hp, 3 phases at 230 V

IcL starter rating

6 A

Utilisation category

AC-53B conforming to EN/IEC 60947-4-2

Current consumption

30 A at nominal load

Type of start

Start with voltage ramp

Power dissipation in W

1 W at full load and at end of starting 31 W in transient state

Assembly style

With heat sink

Function available

Integrated bypass

Supply voltage limits

99…528 V

Supply frequency

50...60 Hz - 5...5 %

Network frequency

47.5...63 Hz

Output voltage

<= power supply voltage

[Uc] control circuit voltage

110 V AC +/- 10 % at 30 mA 24 V AC/DC +/- 10 % at 25 mA 240 V AC +/- 10 % at 65 mA

Starting time

1 s / 100 5 s / 20 Adjustable from 1 to 5 s

Starting torque

30...80 % of starting torque of motor connected directly on the line supply

Discrete output current

2 A DC-13 3 A AC-15

tightening torque

0.8 N.m

Electrical connection

Cage type connector - rigid 1 2.5 mm² AWG 14 control circuit Cage type connector - rigid 1 2.5 mm² AWG 14 power circuit Cage type connector - rigid 2 1 mm² AWG 17 control circuit Cage type connector - rigid 2 1 mm² AWG 17 power circuit Cage type connector - flexible with cable end 1 2.5 mm² AWG 14 control circuit Cage type connector - flexible with cable end 1 2.5 mm² AWG 14 power circuit Cage type connector - flexible without cable end 1 2.5 mm² AWG 14 control circuit Cage type connector - flexible without cable end 1 2.5 mm² AWG 14 power circuit Cage type connector - flexible with cable end 2 0.75 mm² AWG 18 control circuit Cage type connector - flexible with cable end 2 0.75 mm² AWG 18 power circuit Cage type connector - flexible without cable end 2 1 mm² AWG 17 control circuit Cage type connector - flexible without cable end 2 1 mm² AWG 17 power circuit

Marking

CE

Operating position

Vertical +/- 10 degree

height

100 mm

Width

23 mm

Depth

100 mm

Net weight

0.16 kg

Compatibility code

ATS01N1

Motor power range AC-3

0.55…1 kW at 200…240 V 3 phases 1.1…2 kW at 380…440 V 3 phases 0.55…1 kW at 200…240 V 1 phase 1.1…2 kW at 200…240 V 3 phases 2.2…3 kW at 380…440 V 3 phases

Motor starter type

Soft starter

Electromagnetic compatibility

Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards

EN/IEC 60947-4-2

product certifications

C-Tick CCC CSA B44.1-96/ASME A17.5 for starter wired to the motor delta terminal UL GOST

IP degree of protection

IP20

Pollution degree

2 conforming to EN/IEC 60947-4-2

Vibration resistance

1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Relative humidity

5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

Ambient air temperature for operation

-10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C)

Ambient air temperature for storage

-25…70 °C conforming to EN/IEC 60947-4-2

Operating altitude

<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

2.5 cm

Package 1 Width

10.3 cm

Package 1 Length

10.5 cm

Package 1 Weight

178.0 g

Unit Type of Package 2

S02

Number of Units in Package 2

36

Package 2 Height

15.0 cm

Package 2 Width

30.0 cm

Package 2 Length

40.0 cm

Package 2 Weight

6.715 kg

Warranty

18 months

Document Links