Trade Price
£326.06
Per
1
Unit
EA
Pack Quantity
1
This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.
Range of product
Telemecanique Safety light curtains XUSL
Product or component type
Safety module
safety module name
XPSCM
safety module application
For monitoring of single beam photo-electric sensor
function of module
Built-in muting
Safety level
Can reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1 Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061 Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
Safety reliability data
MTTFd = 16.6 years conforming to EN/ISO 13849-1 DC = 95.5 % conforming to EN/ISO 13849-1 PFH = 3.12E-7 1/h conforming to EN/IEC 61508 PFHd = 3.12E-7 1/h conforming to EN/IEC 62061
Number of inputs
2 (terminal(s) MA, MB) for muting function 4 (terminal(s) Z1, Z2, Z3, Z4) for sensor
Input voltage
24 V DC for sensor 24 V DC (terminal(s) U+, U-) for muting function
Input compatibility
XC limit switch for muting function XU2M18PP340... for muting function XU2S18PP340... (infrared) for sensor XU9M18PP340... for muting function
Connections - terminals
Captive screw clamp terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² solid or flexible without cable end Captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, with bezel Captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel Captive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1 mm² solid without cable end Captive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1.5 mm² flexible without cable end Captive screw clamp terminals, removable terminal block, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel Captive screw clamp terminals, removable terminal block, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
Output type
Relay 2 NO (13-14, 23-24), volt-free
Number of additional circuits
0
[Us] rated supply voltage
24 V DC - 20...20 %
Sensor power supply
U+, U-: 24 V DC
Maximum supply current for sensors
200 mA
Input current
200 mA for muting function
Synchronisation time between inputs
3 s (+/- 20 %) for the activation of the MA/MB muting signal
Muting maximum duration
60 s (- 10...30 %)
Maximum line resistance
10 Ohm for sensor power supply
Breaking capacity
20 mA at 24 V for solid state output 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output
Associated fuse rating
4 A gG for relay output conforming to DIN VDE 0660 part 200 4 A gG for relay output conforming to EN/IEC 60947-5-1 6 A fast blow for relay output conforming to DIN VDE 0660 part 200 6 A fast blow for relay output conforming to EN/IEC 60947-5-1
Minimum output current
10 mA for relay output
Minimum output voltage
17 V for relay output
Maximum response time on input open
25 ms
Local signalling
1 LED, function electronic internal fuse status 1 LED, function restarting 1 LED, function safety outputs closed 1 LED, function safety outputs open 1 incandescent lamp, function muting power consumption: 4…6.5 W
output thermal current
5.6 A per relay 11 A maximum
Power consumption in W
15 W
Protection type
Electronic internal fuse
[Ui] rated insulation voltage
300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2 300 V (pollution degree 2) conforming to EN/IEC 60947-5-1
[Uimp] rated impulse withstand voltage
4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2 4 kV overvoltage category III conforming to EN/IEC 60947-5-1
Ambient air temperature for operation
-10…55 °C
Ambient air temperature for storage
-25…85 °C
IP degree of protection
IP20 (terminals) conforming to IEC 60529 IP40 (enclosure) conforming to IEC 60529
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
16 cm
Package 1 Width
6.2 cm
Package 1 Length
11.8 cm
Package 1 Weight
411 g
Unit Type of Package 2
S03
Number of Units in Package 2
20
Package 2 Height
30 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
8.918 kg
Warranty
18 months
Datasheet