Range of produc

Preventa Safety automation

Product or component type

Configurable safety controller

safety module name

XPSMC

Safety use category

Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1 PLE maximum conforming to ISO 13849-1 SIL 3 maximum conforming to IEC 61508

Type of start

Configurable

Standards

EN 1760-1/ISO 13856-1 EN 574/ISO 13851 IEC 60947-5-1 IEC 61508 IEC 60204-1 EN 954-1/EN/ISO 13849-1 IEC 61496-1

product certifications

UL CSA TÜV

[Us] rated supply voltage

24 V DC - 20...20 %

Number of inputs

16

Communication port protocol

Modbus with 1 RJ45 port(s), serial link, transmission rate: 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps Profibus with 1 SUB-D 9-pin female port(s), serial link, transmission rate: 12 Mbps

Safety level

Can reach PL e/category 4 conforming to EN 954-1/EN/ISO 13849-1 Can reach SIL 3 conforming to IEC 61508

Function of module

Dynamic monitoring of hydraulic valves on linear presses Eccentric press Emergency stop monitoring, with or without time delay, 1 or 2-channel wiring Enabling switch monitoring, 2 or 3 contacts Foot switch monitoring Guard monitoring for injection presses and blowing machines Guard monitoring with 1 or 2 limit switches Hydraulic press Magnetic switch monitoring category 4 conforming to EN/IEC 61496 Monitoring safety stop at top dead centre on eccentric press category 3 conforming to EN 574/ISO 13851 Muting function of light curtains Position selector Safety mat monitoring Safety time delays Shaft/chain breaking monitor Zero speed detection Light curtain monitoring category 4 conforming to IEC 61496 Two-hand control category 3 conforming to EN 574/ISO 13851

Synchronisation time between inputs

Depending on configuration selected

Power consumption in W

12 W

Input protection type

External fuse 16 A

[Uc] control circuit voltage

28.8 V

Maximum line resistance

100 Ohm <2000 m

Output type

2 relays, 2 NO contacts (4 NO total) circuit(s) Solid state, 6 circuit(s), volt-free

Breaking capacity

2 A at 24 V for static output circuit 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

Output thermal current

4 A for both outputs simultaneously 6 A for 1 output and 2 A for the other for relay output

[Ith] conventional free air thermal current

16 A for relay output 6.5 A for static output circuit

Associated fuse rating

16 A gL for power supply 4 A gL for relay output 6 A fast blow for relay output

Minimum output current

10 mA for relay output

Minimum output voltage

17 V for relay output

Response time

Configurable : 20 ms or 30 ms with software XPSMCWIN

[Ui] rated insulation voltage

300 V (pollution degree 2) conforming to IEC 60647-5-1, DIN VDE 0110 part 1

[Uimp] rated impulse withstand voltage

4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1

Method of access

Slave

Exchange size

14 words

Number of addresses

1…125 for Profibus 1…247 for Modbus

Parity

Even for Modbus No for Modbus Odd for Modbus

Data format

1 start bit/8 data bits 1 stop bit even or odd 2 stop bits without parity RTU (Remote Terminal Unit) mode

Supported modbus function

01: 8-bit output data/32-bit input data 02: 32-bit input data/8-bit output data 03: information and errors

Local signalling

32 LEDs

mounting support

Mounting plate

Depth

153 mm

height

151.5 mm

Width

74 mm

Net weight

0.82 kg

IP degree of protection

IP20 conforming to IEC 60529

ambient air temperature for operation

-10…55 °C

Ambient air temperature for storage

-25…85 °C

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

9.000 cm

Package 1 Width

18.000 cm

Package 1 Length

26.000 cm

Package 1 Weight

1.270 kg

Unit Type of Package 2

S04

Number of Units in Package 2

6

Package 2 Height

30.000 cm

Package 2 Width

40.000 cm

Package 2 Length

60.000 cm

Package 2 Weight

8.430 kg

Warranty

18 months