Trade Price
£100.76
Per
1
Unit
EA
Pack Quantity
1
This yellow, complete ready to use, pendant station for control circuits is designed for control of single-speed hoist motors. Its pistol grip design makes it very intuitive and comfortable for the operator to use. It comprises a polypropylène enclosure with 2 booted push buttons mechanically interlocked. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. This robust pendant control station complies with the safety requirements of IEC standards.
Range of product
Harmony XAC
Product or component type
Pendant control station
Device short name
XACA pistol grip
Control station type
Double insulated
Enclosure material
Polypropylene
Control type
Intuitive
Electrical circuit type
Control circuit
Enclosure type
Complete ready for use
Control station application
Control of single speed hoist motor
Control station composition
2 booted push-buttons
Control button type
First push-button 1 NC + 1 NO raise, slow Second push-button 1 NC + 1 NO lower, slow
Product compatibility
ZB2BE102 + ZB2BE101 for each direction
Mechanical interlocking
With mechanical interlocking
Control station colour
Yellow
Connections - terminals
Screw clamp terminals, 1 x 2.5 mm² with or without cable end Screw clamp terminals, 2 x 1.5 mm² with or without cable end
standards
EN/ISO 13850: 2006 UL 508 EN/IEC 60204-32 CSA C22.2 No 14 EN/IEC 60947-5-1 EN/IEC 60947-5-5
product certifications
UL CSA
Protective treatment
TH
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…70 °C
Vibration resistance
15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
Shock resistance
100 gn conforming to IEC 60068-2-27
Overvoltage category
Class II conforming to IEC 61140
IP degree of protection
IP65 conforming to IEC 60529
IK degree of protection
IK08 conforming to EN 50102
Mechanical durability
1000000 cycles
Cable entry
Rubber sleeve with stepped entry 7…15 mm
Contact code designation
A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
[Ithe] conventional enclosed thermal current
10 A
[Ui] rated insulation voltage
600 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947-1
contact operation
Slow-break
Maximum resistance across terminals
25 MOhm
Operating force
13…15 N
Short-circuit protection
10 A fuse protection by cartridge fuse type gG
Rated operational power in W
40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C
Terminals description ISO n°1
(13-14)NO (11-12)NC
Terminal identifier
(11-12)NC (13-14)NO
Net weight
0.32 kg
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
6.100 cm
Package 1 Width
8.900 cm
Package 1 Length
30.600 cm
Package 1 Weight
292.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
15
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
4.885 kg
Unit Type of Package 3
P06
Number of Units in Package 3
120
Package 3 Height
75.000 cm
Package 3 Width
60.000 cm
Package 3 Length
80.000 cm
Package 3 Weight
49.844 kg
Warranty
18 months
Datasheet
Product Catalogue