Range of product

Harmony Safety Automation

Product or component type

Safety module

safety module name

XPSUAB

safety module application

For electrical monitoring of two-hand control stations For application with safety switchover contact For emergency stop, guard and light curtain monitoring Monitoring antivalent contacts

function of module

Emergency stop monitoring 1-channel wiring Guard monitoring 1-channel wiring Monitoring 1 PNP sensor Monitoring two-hand control station type IIIA Magnetic switch monitoring Light curtain monitoring RFID switch Monitoring of electro-sensitive protection equipment (ESPE) Proximity sensor monitoring

Safety level

Can reach PL c/category 1 conforming to ISO 13849-1 Can reach SILCL 1 conforming to IEC 62061 Can reach SIL 1 conforming to IEC 61508

Safety reliability data

MTTFd >= 30 years conforming to ISO 13849-1 Dcavg < 60 % conforming to ISO 13849-1 PFHd = 1177E-09 1/h conforming to ISO 13849-1 HFT = 0 conforming to IEC 62061 PFHd = 1177E-09 1/h conforming to IEC 62061 SFF > 60% conforming to IEC 62061 HFT=0 conforming to IEC 61508-1 PFHd = 1177E-09 1/h conforming to IEC 61508-1 SFF > 60% conforming to IEC 61508-1 Type = B conforming to IEC 61508-1

Electrical circuit type

NC pair PNP pair Antivalent pair OSSD pair

Connections - terminals

Removable screw terminal block, 0.2...2.5 mm² solid or flexible Removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductor Removable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductor Removable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel Removable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel

[Us] rated supply voltage

48...240 V AC/DC - 10...10 %

Synchronisation time between inputs

0.5 s 2.2 s

Type of start

Automatic/manual/monitored

Power consumption in W

2.0 W 48 V DC

Power consumption in VA

6.5 VA 240 V AC 50/60 Hz

Input protection type

Internal, electronic

safety outputs

1 C/O

safety inputs

1 safety input 24 V DC 5 mA

maximum wire resistance

500 Ohm

Input compatibility

Normally closed circuit conforming to ISO 14119 XC limit switch conforming to ISO 14119 Mechanical contact conforming to ISO 14119 Normally closed circuit conforming to ISO 13850 Antivalent pair conforming to ISO 14119 OSSD pair conforming to IEC 61496-1-2 Two-hand control conforming to EN 574/ISO 13851-III A 3-wire proximity sensors PNP

[Ie] rated operational current

5 A AC-1 for normally open relay contact 3 A AC-15 for normally open relay contact 5 A DC-1 for normally open relay contact 3 A DC-13 for normally open relay contact 3 A AC-1 for normally closed relay contact 1 A AC-15 for normally closed relay contact 2 A DC-1 for normally closed relay contact 1 A DC-13 for normally closed relay contact

Control Outputs

2 on/off configurable pulsed output

Input/output type

Semiconductor pulsed diagnostic output 24 V DC, 20 mA Z1, not safety-related

[Ith] conventional free air thermal current

3 A

Associated fuse rating

6 A gG for relay output conforming to IEC 60947-1

Minimum output current

10 mA for relay output

Minimum output voltage

15 V for relay output

Maximum response time on input open

20 ms

[Ui] rated insulation voltage

250 V (pollution degree 2) conforming to EN/IEC 60947-1

[Uimp] rated impulse withstand voltage

4 kV overvoltage category II conforming to EN/IEC 60947-1

Local signalling

LED (green) for power ON LED (red) for error LED (yellow) for start LED (yellow) for safety status LED (yellow) for safety input S12 LED (yellow) for safety input S13

mounting support

35 mm symmetrical DIN rail

Depth

120 mm

Ambient air temperature for operation

-25…55 °C

height

100 mm

Width

22.5 mm

Net weight

0.200 kg

Standards

IEC 60947-5-1 IEC 61508-1 functional safety standard IEC 61508-2 functional safety standard IEC 61508-3 functional safety standard IEC 61508-4 functional safety standard IEC 61508-5 functional safety standard IEC 61508-6 functional safety standard IEC 61508-7 functional safety standard ISO 13849-1 functional safety standard IEC 62061 functional safety standard

product certifications

TÜV cULus

IP degree of protection

IP20 (terminals) conforming to EN/IEC 60529 IP40 (housing) conforming to EN/IEC 60529 IP54 (mounting area) conforming to EN/IEC 60529

Relative humidity

5…95 % non-condensing

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

6.5 cm

Package 1 Width

13.5 cm

Package 1 Length

15.5 cm

Package 1 Weight

262.0 g

Unit Type of Package 2

S03

Number of Units in Package 2

16

Package 2 Height

30 cm

Package 2 Width

30 cm

Package 2 Length

40 cm

Package 2 Weight

4.939 kg

Warranty

18 months