Trade Price
POA
Per
1
Unit
Pack Quantity
This XPSECPE safety module allows to expand the number of safety contacts available on XPS base modules. It is supplied with 24V AC/DC, has 4 safety circuits, 2 additional outputs and removable spring terminals. This safety module meets the requirements of PL e/Category 4 conforming to EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061 (when connected to the appropriate module). It allows extension of the number of safety contacts, are available as additions to Preventa XPS base modules (Emergency stop, limit switch, two-hand control, etc.). 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has spring terminals for fast and reliable wiring of safety circuits.
Range of produc
Preventa Safety automation
Product or component type
Preventa safety module
safety module name
XPSECPE
safety module application
Increasing the number of safety contacts
function of module
Increasing the number of safety contacts
Safety level
Can reach PL e/category 4 can reach the maximum safety level of module base conforming to EN/ISO 13849-1 Can reach SILCL 3 can reach the maximum safety level of module base conforming to EN/IEC 62061
Safety reliability data
MTTFd > 100 years conforming to EN/ISO 13849-1 DC = 0...99 % conforming to EN/ISO 13849-1 PFHd = 2.47E-8 1/h conforming to EN/IEC 62061
Output type
Relay, 8 NO circuit(s), volt-free
[Us] rated supply voltage
115...230 V AC - 15...10 %
number of additional circuits
2 NC + 1 solid state output
Supply frequency
50/60 Hz
Power consumption in VA
6 VA
Input protection type
Internal, electronic
Breaking capacity
3 A at 24 V (DC-13) time constant: 50 ms for relay output 20 mA at 24 V for solid state output circuit
Output thermal current
6 A per relay for relay output
[Ith] conventional free air thermal current
24 A for relay output
Associated fuse rating
6 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200
Minimum output current
10 mA for relay output
Minimum output voltage
5 V for relay output
Maximum response time on input open
10 ms
[Ui] rated insulation voltage
300 V (pollution degree 2) conforming to EN/IEC 60947-5-1, DIN VDE 0110 parts 1 & 2
[Uimp] rated impulse withstand voltage
4 kV overvoltage category III conforming to EN/IEC 60947-5-1, DIN VDE 0110 parts 1 & 2
Local signalling
3 LEDs
Connections - terminals
Spring terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² solid without cable end Spring terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² flexible without cable end Spring terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel Spring terminals, removable terminal block, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel Spring terminals, removable terminal block, 2 x 0.2...2 x 1 mm² solid without cable end Spring terminals, removable terminal block, 2 x 0.2...2 x 1 mm² flexible without cable end Spring terminals, removable terminal block, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel Spring terminals, removable terminal block, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel
mounting support
35 mm symmetrical DIN rail
Net weight
0.65 kg
Standards
EN/IEC 60947-5-1 EN/IEC 60204-1
product certifications
TÜV UL CSA
IP degree of protection
IP20 (terminals) conforming to EN/IEC 60529 IP40 (enclosure) conforming to EN/IEC 60529
ambient air temperature for operation
-25…55 °C
Ambient air temperature for storage
-25…70 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
12.5 cm
Package 1 Width
11.5 cm
Package 1 Length
0.6 cm
Package 1 Weight
380.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
12
Package 2 Height
15.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
4.938 kg
Warranty
18 months
Datasheet