ZBRRC

RECEIVER XB5R PROGRAMMABLE

Trade Price

POA

Per

1

Unit

EA

Pack Quantity

1

ZBRRC

Information

This configurable receiver is part of the ranges Harmony XB5R plastic and XB4R metal wireless and batteryless pushbuttons. It is equipped with 2 buttons (teach and parameter setting), 6 indicating LEDs (power ON, function modes, output status, signal strength). It features 4 PNP outputs, 200 mA /24 V and it can be supplied with 24V DC. It is easily combined with wireless and batteryless pushbuttons XB4R/XB5R and limit switches XCKW/XCMW. It operates with the protocol Zigbee green power 2.4 GHz in compliance with IEEE 802.15.4. Its protection index is IP20. It weighs 130g and its dimensions are, 36mm wide, 108mm high, 75mm deep.

Technical Specifications

Range of product

Harmony

Product or component type

Programmable receiver

Device short name

ZBRRC

Product specific application

Interface to PLC

function of module

Monostable

Reset time

2 ms time delay

Transmission frequency

2405 MHz

emission class

5M00G7W

Antenna type

Omnidirectional

Output type

Transistor PNP

Output contacts

4 PNP

Time delay range

0.5 s (tolerance: - 15...15 %)

Maximum switching current

0.2 mA DC

Minimum switching current

10 mA at 5 V DC

[Us] rated supply voltage

24 V DC - 15...20 %

Maximum voltage drop

<2 V DC at 2 A

Communication port protocol

Zigbee green power at 2.4 GHz conforming to IEEE 802.15.4

Maximum sensing distance

100 m in free field 25 m transmitter in a plastic box type XAL D and receiver in a metal enclosure 40 m transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna

Response time

< 30 ms after transmitter clicks

Utilisation category

DC-13 conforming to IEC 60947-5-1

Maximum power consumption in VA

20 VA DC

Maximum power consumption in W

20 W DC

Breaking capacity

4.8 W (per output)

Short-circuit protection

0.4 A fuse type fast blow

Operating position

Any position without derating

Electrical connection

1 conductor cable 0.14…2.5 mm² - AWG 26...AWG 14 - solid - without cable end conforming to IEC 60947-1 2 conductors cable 0.14…1.5 mm² - AWG 26...AWG 16 - solid - without cable end conforming to IEC 60947-1 1 conductor cable 0.14…4 mm² - AWG 26...AWG 12 - flexible - with cable end conforming to IEC 60947-1 2 conductors cable 0.14…1.5 mm² - AWG 26...AWG 16 - flexible - with cable end conforming to IEC 60947-1

Tightening torque

0.5…1 N.m conforming to IEC 60947-1

Housing material

Self-extinguishing plastic

Status LED

1 LED green for power ON 1 LED green and yellow for reception signal 4 LEDs green for relay ON

Mounting support

35 mm symmetrical DIN rail conforming to IEC 60715 Mounting plate

Rated short-duration power frequency withstand voltage

1 kV 50 Hz conforming to IEC 60947-5-1

[Uimp] rated impulse withstand voltage

0.8 kV

Surge withstand

0.5 kV differential mode conforming to IEC 61000-4-5 1 kV common mode conforming to IEC 61000-4-5

Max power consumption in W

1 mW

Number of channels

1

Modulation Technique

O-QPSK

Bandwidth

5 MHz

Antenna gain

0 dBi

Width

36 mm

height

108 mm

Depth

75 mm

Net weight

0.13 kg

standards

IEC 60947-5-1

Radio agreement

RSS SRRC ANATEL ARIB T66 FCC ICASA

product certifications

CCC CSA GOST C-Tick UL

Marking

CE

Ambient air temperature for storage

-40…70 °C

Relative humidity

90 % at -20…55 °C, without condensation conforming to ETSI EN 300 440-1

Vibration resistance

+/- 7.5 mm (f= 5…14 Hz) conforming to IEC 60068-2-6 2 gn (f= 8…150 Hz) conforming to IEC 60068-2-6

Shock resistance

10 gn (duration = 16 ms) for 6000 shocks conforming to IEC 60068-2-27

IP degree of protection

IP20 (casing) conforming to IEC 60529 IP20 (terminals)

Pollution degree

2 conforming to IEC 60664-1

Overvoltage category

III conforming to IEC 60664-1

Insulation resistance

> 500 MOhm at 500 V DC conforming to NF C 20-030

[Ui] rated insulation voltage

60 V conforming to IEC 60664-1

Electromagnetic compatibility

Immunity for industrial environments conforming to IEC 61000-6-2 Conducted and radiated emissions class B conforming to CISPR 22 Electrostatic discharge immunity test - test level: 8 kV (in free air (in insulating parts)) conforming to IEC 61000-4-2 Electrostatic discharge immunity test - test level: 6 kV (on contact (on metal parts)) conforming to IEC 61000-4-2 Susceptibility to electromagnetic fields - test level: 10 V/m (80...2000 MHz) conforming to IEC 61000-4-3 Susceptibility to electromagnetic fields - test level: 3 V/m (80...2700 MHz, distance = 20 m) conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test - test level: 2 kV (power supply wires) conforming to IEC 61000-4-4 Conducted RF disturbances - test level: 10 V conforming to IEC 61000-4-6 Radiated emission conforming to ETSI EN 300 440-1 Conducted emission conforming to EN 300-489-1 Conducted emission conforming to ETSI EN 300 489-3 Radiated emission conforming to ETSI EN 300 440-2 Electrical fast transient/burst immunity test - test level: 1 kV (PNP output wires) conforming to IEC 61000-4-4 1.2/50 µs shock waves immunity test - test level: 0.5 kV (differential mode) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (common mode) conforming to IEC 61000-4-5 Immunity to microbreaks and voltage drops - test level: 7 ms conforming to IEC 61000-4-11

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

4.6 cm

Package 1 Width

7.9 cm

Package 1 Length

9.6 cm

Package 1 Weight

122.0 g

Unit Type of Package 2

S03

Number of Units in Package 2

64

Package 2 Height

30.0 cm

Package 2 Width

30.0 cm

Package 2 Length

40.0 cm

Package 2 Weight

8.498 kg

Warranty

18 months

Document Links

Datasheet