METSEPM5331
PM5330 power meter 2DI/2DO/2REL Modbus
Trade Price
£736.90
Per
1
Unit
EA
Pack Quantity
1
Information
This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display and carries additional MID certification for revenue applications. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 64 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 31st Harmonic. Include 256 kiloBytes of memory for two fixed parameters, active and reactive energy. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 415 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 35 to 690 VAC at 47 to 63 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 47 to 63 Hz. Communication protocol is Modbus RTU and ASCII 2 wires with RS485 port support. The meter also has two digital inputs or digital outputs, configurable, and dual relay outputs. There are 35 configurable alarms and it supports four tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.83 inches (72 millimetres), height 3.78 inches (96 millimetres) and product weight 15.2 onces (430 g).
Technical Specifications
Range
PowerLogic
Product name
PowerLogic PM5000
Device short name
PM5331
Product or component type
Power meter
Power quality analysis
up to the 31st harmonic
Device application
Power monitoring Multi-tariff
Type of measurement
Current Voltage Frequency Power factor Energy Active and reactive power
supply voltage
90...450 V AC 45...65 Hz 100...300 V DC
Network frequency
50 Hz 60 Hz
[In] rated current
1 A 5 A
type of network
1P + N 3P 3P + N
Maximum power consumption in VA
11 VA at 415 V
Ride-through time
80 ms 120 V AC typical 100 ms 230 V AC typical 100 ms 415 V AC typical 50 ms 125 V DC typical
Display type
Monochrome graphic LCD
Display resolution
128 x 128 pixels
Sampling rate
64 samples/cycle
Measurement current
5…8500 mA
Analogue input type
Voltage (impedance 5 MOhm) Current (impedance <= 0.3 mOhm)
Measurement voltage
35…760 V AC 45...65 Hz between phases 20…400 V AC 45...65 Hz between phase and neutral
Frequency measurement range
45…65 Hz
Number of inputs
2 digital
Measurement accuracy
Active energy +/- 0.5 % Reactive energy +/- 2 % Active power +/- 0.5 % Apparent power +/- 0.5 % Frequency +/- 0.05 % Power factor +/- 0.5 Current +/- 0.5 % Voltage +/- 0.5 % Apparent energy +/- 0.5 % Reactive power +/- 2 %
Accuracy class
Class 0.5S active energy conforming to IEC 62053-22
Number of outputs
2 relay 2 digital
Information displayed
Tariff (4)
Communication port protocol
Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds even/odd or none - 2 wires, insulation 2500 V JBUS
Communication port support
RS485
data recording
Alarm logs Min/max of instantaneous values Data logs Time stamping Maintenance logs Event logs
Memory capacity
256 kB
Connections - terminals
Voltage circuit: screw terminal block4 Control circuit: screw terminal block2 Current transformer: screw terminal block6 Input/output circuit: screw terminal block6 Relay output: screw terminal block4 Ethernet network: RJ45 connector
Mounting mode
Flush-mounted
Mounting support
Framework
Standards
EN 50470-3 IEC 62053-22 IEC 61557-12 UL 61010-1 IEC 62053-24 EN 50470-1 IEC 60529
Product certifications
CE conforming to IEC 61010-1 CULus conforming to UL 61010-1 MID conforming to EN 50470-1 MID conforming to EN 50470-3
Width
96 mm
Depth
72 mm
Height
96 mm
Net weight
430 g
Electromagnetic compatibility
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Surge immunity test level 4 conforming to IEC 61000-4-5 Voltage dips and interruptions immunity test level 3 conforming to IEC 61000-4-11 Limits for harmonic current emissions class A conforming to IEC 61000-3-2 Conducted RF disturbances level 3 conforming to IEC 61000-4-6 Magnetic field at power frequency level 4 conforming to IEC 61000-4-8 Conducted and radiated emissions class B conforming to EN 55022 Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3 Electrostatic discharge - test level: 8 kV level 4 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
IP degree of protection
IP54 display: conforming to IEC 60529 IP30 rear: conforming to IEC 60529
Relative humidity
5…95 % at 50 °C non-condensing
Pollution degree
2
Ambient air temperature for operation
-25…70 °C meter -20…70 °C display -25…-20 °C (with reduced performance) display
Ambient air temperature for storage
-40…85 °C
Operating altitude
2000 m CAT III 3000 m CAT II
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
11.4 cm
Package 1 Width
12.5 cm
Package 1 Length
12.7 cm
Package 1 Weight
550.0 g
Unit Type of Package 2
S03
Number of Units in Package 2
12
Package 2 Height
30.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
6.92 kg
Warranty
18 months
Document Links
Datasheet