Trade Price
POA
Per
1
Unit
Pack Quantity
Range of product
Harmony Solid State Relays
Product or component type
Solid state relay up to 30 A
Provided accessory
Thermal pad
Device short name
SSP1
mounting support
Panel
Number of phases
1 phase
[In] rated current
25 A
solid state output type
SCR output Zero voltage switching
Output switching mode
Zero voltage switching
[Uc] control circuit voltage
4...32 V DC
Minimum switching voltage
4 V DC turn-on
Maximum switching voltage
1 V DC turn-off
Response time
0.5 cycle (turn-on) 0.5 cycle (turn-off)
Input current
10 mA at 12 V DC
Output voltage
24...300 V AC
Load current
0.15…25 A
Transient overvoltage
600 V
Surge current
250 A for 16.6 ms
Maximum I²t for fusing
259 A².s for 8.33 ms at 60 Hz 258 A².s for 10 ms at 50 Hz
Co-ordination type
Type 1 - 25 A miniature circuit breaker (MCB) - curve B Type 2 - 20 A miniature circuit breaker (MCB) - curve B
Maximum leakage current
1 mA off-state
Maximum voltage drop
<1.15 V on-state
DV/dt
500 V/µs off-state at maximum voltage
Power factor
0.5 (with maximum load)
Motor controller rating
0.5 hp 120 V AC 1 hp 240 V AC
Insulation resistance
1000 MOhm at 500 V DC
Maximum capacitance
10 pF for input/output
Dielectric strength
4 kV AC for input/output 4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage
6 kV output to case 6 kV input to output
Tightening torque
1.5...1.7 N.m for input 2...2.2 N.m for output 17.7...19.47 lb.in for output 13.27...15.04 lb.in for input 0.5...0.6 N.m for auxillary terminal 4.4...5.3 lb.in for auxillary terminal
Connections - terminals
Screw terminals: 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input Screw terminals: 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output Screw terminals: 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input Screw terminals: 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output Forked type tag connectors: 9.2 x 4 mm for input Ring lugs: 9.2 x 4 mm for input Forked type tag connectors: 11.7 x 4.5 mm for output Ring lugs: 11.7 x 4.5 mm for output
Auxiliary/Alarm connection terminal
Screw-type connector, 0.5...1.5 mm² (AWG 20...AWG 16) with slotted Philips screwdriver
Thermal resistance
0.8 °C/W junction to case
LED indicator
LED, steady, green for ON status for control input/test button actuated LED, steady, amber for ON status for load LED, flashing, amber for control input to energise load LED, steady, red for open-circuit for control input LED, flashing, red for load cut-off/short-circuit
Maximum alarm output current
30 mA at 32 V DC
minimum load current
150 mA
IP degree of protection
IP20
Electromagnetic compatibility
Electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 Electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test criteria A output ports conforming to IEC 61000-4-3 Radiated radio-frequency electromagnetic field immunity test criteria B alarm port conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test 1 kV, 5/100 kHz criteria B output ports conforming to IEC 61000-4-4 Surge immunity test 1 kV criteria A output ports line to line conforming to IEC 61000-4-5 Surge immunity test 2 kV criteria A output ports line to earth conforming to IEC 61000-4-5
Safety reliability data
B10d = 1731395 MTTFd = 1875.9 years
Net weight
97.1 g
Device presentation
Complete product
Ambient air temperature for operation
-40…80 °C
Ambient air temperature for storage
-40…125 °C
Pollution degree
2
Overvoltage category
III
product certifications
EAC CSA UL CE
Marking
EAC UL CSA CE
standards
UL 508 IEC 62314 CSA C22.2 No 14-13 IEC 60950-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.8 cm
Package 1 Width
4.7 cm
Package 1 Length
6.5 cm
Package 1 Weight
109.0 g
Unit Type of Package 2
S01
Number of Units in Package 2
28
Package 2 Height
15.0 cm
Package 2 Width
15.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
3.408 kg
Warranty
18 months
Datasheet