Trade Price
POA
Per
1
Unit
Pack Quantity
This Harmony SSP solid state panel mount single-phase relay is rated 90A, is controlled with a 90V to 280V AC input, has a rated load voltage of 48V to 660V AC with zero voltage switching, ideal for resistive loads. It has a visual indicator showing the status of its input and a alarm output enabling a quick response to unexpected events. It also has a test button for easy debugging, testing and commissioning. It is also silent and reliable thanks to the absence of moving contacts.
Range of produc
Harmony Solid State Relays
Provided accessory
Thermal pad
Product or component type
Solid state relay up to 125 A
Device short name
SSP1
Number of phases
1 phase
[In] rated current
90 A
solid state output type
Zero voltage switching SCR output
Output switching mode
Zero voltage switching
Minimum switching voltage
90 V AC turn-on
Maximum switching voltage
10 V AC turn-off
Response time
30 ms (turn-off) 25 ms (turn-on)
Input current
5…10 mA
Load current
0.15…90 A
Transient overvoltage
1200 V
Surge current
1200 A for 16.6 ms
Maximum I²t for fusing
5976 A².s for 8.33 ms at 60 Hz 6560 A².s for 10 ms at 50 Hz
Co-ordination type
Type 1 - 63 A miniature circuit breaker (MCB) - curve B Type 2 - 50 A miniature circuit breaker (MCB) - curve B
Maximum leakage current
1 mA off-state
Maximum voltage drop
<1.15 V on-state
DV/dt
500 V/µs off-state at maximum voltage
Power factor
0.5 (with maximum load)
Motor controller rating
1.5 hp 120 V AC 3 hp 240 V AC 7.5 hp 480 V AC
Insulation resistance
1000 MOhm at 500 V DC
Maximum capacitance
8 pF for input/output
Dielectric strength
4 kV AC for input/output 4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage
6 kV output to case 6 kV input to output
Tightening torque
1.5...1.7 N.m for input 2...2.2 N.m for output
Connections - terminals
Screw terminals: 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input Screw terminals: 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output Screw terminals: 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input Screw terminals: 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output Forked type tag connectors: 9.2 x 4 mm for input Ring lugs: 9.2 x 4 mm for input Forked type tag connectors: 11.7 x 4.5 mm for output Ring lugs: 11.7 x 4.5 mm for output
Thermal resistance
0.27 °C/W junction to case
thermal pad impedance
0.48 °C-in²/W at 25 psi
LED indicator
LED, green for input
IP degree of protection
IP20
Safety reliability data
B10d = 1731395 MTTFd = 1875.9 years
Net weight
89.2 g
device presentation
Complete product
ambient air temperature for operation
-40…80 °C
Ambient air temperature for storage
-40…125 °C
Pollution degree
2
Overvoltage category
III
product certifications
EAC CSA UL CE
Marking
UL CSA EAC CE
Standards
IEC 62314 UL 508 CSA C22.2 No 14-13 IEC 60950-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
3.800 cm
Package 1 Width
4.800 cm
Package 1 Length
6.500 cm
Package 1 Weight
101.900 g
Unit Type of Package 2
S01
Number of Units in Package 2
30
Package 2 Height
15.000 cm
Package 2 Width
15.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
3.356 kg
Warranty
18 months
Datasheet