BCPMSCE1S
42 Circ SpCore BCPME w/o CTs
Trade Price
£8,846.92
Per
1
Unit
EA
Pack Quantity
1
Information
This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM allow the monitoring of both the branch circuits and mains values, incoming power and energy for a maximum of 42 circuits. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with serial connection for either Modbus RTU or BACnet MS/TP, and an Ethernet connection for Modbus TCP, BACnet IP and SNMP. The meter need to be powered by a 100V AC to 277V AC supply source. This version is for 42 circuits, but do not include branch current transformers nor ribbon. The device dimensions are 353mm in width, 253mm in height, 71mm in depth and weight 1.5 kilograms.
Technical Specifications
Range
PowerLogic
Product name
PowerLogic BCPMSC
Product or component type
Multi-circuit energy meter
Device short name
BCPMSCE
Model type
Advanced + ethernet
Power monitoring
Basic instrumentation
energy management
Sub billing and cost allocation
Device application
Sub billing
Power quality analysis
voltage sag and swell detection
Type of measurement
Voltage Current Frequency Active power Power factor Active energy
[Us] rated supply voltage
90...277 V AC 50/60 Hz +/- 1 %
Network frequency
50 Hz 60 Hz
current transformer input
Current 0.333 V42 x Current 1 V
Update time
1.8 s
Measurement voltage
90…277 V phase to neutral 150…480 V phase to phase
Measurement accuracy
Branch current 2 % 0.25…2 A Branch current 1 % 2…100 A Mains current 3 % 1…100 % Mains current 3 % 2…100 % Voltage 1 % 90…277 V
Sampling rate
256 samples/cycle
Provided equipment
2 x adapter board 0 x current transformer
Communication port protocol
Modbus RTU BACnet IP BACnet MS/TP Modbus TCP SNMP v2
Communication port support
RS485 ETHERNET
communication of data
Under voltage alarm Low-low current alarm High-high current alarm High current alarm Low current alarm Over voltage alarm
Mounting mode
Clip-on
mounting support
Board
Relative humidity
95 %
Ambient air temperature for operation
0…60 °C
Ambient air temperature for storage
-40…70 °C
Operating altitude
3000 m
standards
IEC 61010-1 EN 61010 ANSI C12.1
Product certifications
UL 508
Width
288 mm
height
146 mm
Net weight
1.5 kg
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
14.287 cm
Package 1 Width
15.24 cm
Package 1 Length
19.05 cm
Package 1 Weight
4.536 kg
Warranty
18 months
Document Links
Datasheet