BCPMSCA1S
HDBPM A split core CT meter, meter board
Trade Price
POA
Per
1
Unit
Pack Quantity
Information
This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM allow the monitoring of both the branch circuits and mains values, incoming power and energy for a maximum of 42 circuits. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with a RS485 serial port and the Modbus protocol support, more communication options with the gateway H8951. The meter need to be powered by a 90V AC to 277V AC supply source. This version is for 42 circuits, but do not include branch current transformers nor ribbon. The device dimensions are 228mm in width, 146mm in height and weight 1.5 kilograms.
Technical Specifications
Range
PowerLogic
Product name
PowerLogic BCPMSC
Product or component type
Multi-circuit energy meter
Device short name
BCPMSCA
Model type
Advanced
Power monitoring
Basic instrumentation
energy management
Sub billing and cost allocation
Device application
Sub billing
Power quality analysis
voltage sag and swell detection
Type of measurement
Voltage Current Frequency Active power Power factor Active energy
[Us] rated supply voltage
90...277 V AC 50/60 Hz +/- 1 %
Network frequency
50 Hz 60 Hz
current transformer input
Current 0.333 V42 x Current 1 V
Update time
1.8 s
Measurement voltage
90…277 V phase to neutral 150…480 V phase to phase
Measurement accuracy
Branch current 2 % 0.25…2 A Branch current 1 % 2…100 A Mains current 3 % 1…100 % Mains current 3 % 2…100 % Voltage 1 % 90…277 V
Sampling rate
256 samples/cycle
Provided equipment
2 x adapter board 0 x current transformer
Communication port protocol
Modbus RTU
Communication port support
RS485
communication of data
High current alarm High-high current alarm Low current alarm Over voltage alarm Low-low current alarm Under voltage alarm
Mounting mode
Clip-on
mounting support
Board
Relative humidity
95 %
Ambient air temperature for operation
0…60 °C
Ambient air temperature for storage
-40…70 °C
Operating altitude
3000 m
standards
EN 61010 ANSI C12.1 IEC 61010-1
Product certifications
UL 508
Width
288 mm
height
146 mm
Net weight
1.5 kg
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
10.4 cm
Package 1 Width
31.0 cm
Package 1 Length
38.7 cm
Package 1 Weight
1.241 kg
Warranty
18 months
Document Links
Datasheet