LXM32MC10N4
LXM32 MODUL100A RMS PEAK3PH 480V
Trade Price
POA
Per
1
Unit
Pack Quantity
Information
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 40A at 4kHz and a continuous power of 11000W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. It is an IP20 rated product. Its dimensions are 180mm (Width) x 240mm (Depth) x 385mm (Height). It weighs 9.6kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
Technical Specifications
Range of produc
Lexium 32
Product or component type
Motion servo drive
Device short name
LXM32M
Format of the drive
Book
Network number of phases
Three phase
[Us] rated supply voltage
380...480 V - 15...10 %
Supply voltage limits
323…528 V
Supply frequency
50/60 Hz - 5...5 %
Network frequency
47.5...63 Hz
EMC filter
Integrated
Continuous output current
40 A at 4 kHz
Output current 3s peak
100 A at 480 V for 5 s
maximum continuous power
11000 W at 400 V 11000 W at 480 V
Nominal power
11 kW at 400 V 4 kHz 11 kW at 480 V 8 kHz
Line current
23.3 A 140 % at 480 V, without line choke 32 A 54 % at 480 V, with external line choke of 0.5 mH 38.1 A 70 % at 480 V, with external line choke of 0.5 mH
switching frequency
4 kHz
Overvoltage category
III
Maximum leakage current
30 mA
Output voltage
<= power supply voltage
electrical isolation
Between power and control
Type of cable
Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR
Electrical connection
Terminal, clamping capacity: 8 mm², AWG 8 (CN8)
Tightening torque
CN8: 3.8 N.m
Discrete input number
2 capture discrete input(s)
Discrete input type
Capture (CAP terminals)
Sampling duration
0.25 ms
Discrete input voltage
24 V DC for capture
Discrete input logic
Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Response time
<= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number
3
Discrete output type
Logic output(s) (DO)24 V DC
Discrete output voltage
<= 30 V DC
Discrete output logic
Positive or negative (DO) conforming to EN/IEC 61131-2
Contact bounce time
<= 1 ms for compliment of STO_A, compliment of STO_B
Braking current
50 mA
Response time on output
250 µs (DO) for discrete output(s)
Control signal type
Pulse train output (PTO) RS422 <500 kHz <100 m
Protection type
Against reverse polarity: inputs signal
Safety function
STO (safe torque off), integrated
Safety level
SIL 3 conforming to EN/IEC 61508
Communication interface
Modbus, integrated Profinet, with separated communication card
Connector type
RJ45 (labelled CN7) for Modbus
commissioning port
2-wire RS485 multidrop for Modbus
Transmission rate
9600, 19200, 38400 bps for bus length of 40 m for Modbus
Number of addresses
1…247 for Modbus
Status LED
1 LED (red) servo drive voltage
Signalling function
Display of faults 7 segments
Marking
CE
Operating position
Vertical +/- 10 degree
Product compatibility
Servo motor BMH (190 mm, 1 motor stacks) Servo motor BMH (190 mm, 2 motor stacks) Servo motor BMH (190 mm, 3 motor stacks) Servo motor BMH (190 mm, 4 motor stacks)
Width
180 mm
height
385 mm
Depth
240 mm
Net weight
9.6 kg
Electromagnetic compatibility
Conducted EMC, class A group 1 conforming to EN 55011
Standards
EN/IEC 61800-3
product certifications
CSA
IP degree of protection
IP20 conforming to EN/IEC 60529
Vibration resistance
1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
Shock resistance
15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree
2 conforming to EN/IEC 61800-5-1
Environmental characteristic
Classes 3C1 conforming to IEC 60721-3-3
Relative humidity
Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation
0…50 °C conforming to UL
Ambient air temperature for storage
-25…70 °C
Type of cooling
Integrated fan
Operating altitude
<= 1000 m without derating
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
34.5 cm
Package 1 Width
30.0 cm
Package 1 Length
56.0 cm
Package 1 Weight
10.348 kg
Unit Type of Package 2
P06
Number of Units in Package 2
2
Package 2 Height
80.0 cm
Package 2 Width
80.0 cm
Package 2 Length
60.0 cm
Package 2 Weight
35.0 kg
Warranty
18 months
Document Links
Datasheet