LXM32MC10N4

LXM32 MODUL100A RMS PEAK3PH 480V

Trade Price

POA

Per

1

Unit

Pack Quantity

LXM32MC10N4

Information

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 40A at 4kHz and a continuous power of 11000W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. It is an IP20 rated product. Its dimensions are 180mm (Width) x 240mm (Depth) x 385mm (Height). It weighs 9.6kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.

Technical Specifications

Range of produc

Lexium 32

Product or component type

Motion servo drive

Device short name

LXM32M

Format of the drive

Book

Network number of phases

Three phase

[Us] rated supply voltage

380...480 V - 15...10 %

Supply voltage limits

323…528 V

Supply frequency

50/60 Hz - 5...5 %

Network frequency

47.5...63 Hz

EMC filter

Integrated

Continuous output current

40 A at 4 kHz

Output current 3s peak

100 A at 480 V for 5 s

maximum continuous power

11000 W at 400 V 11000 W at 480 V

Nominal power

11 kW at 400 V 4 kHz 11 kW at 480 V 8 kHz

Line current

23.3 A 140 % at 480 V, without line choke 32 A 54 % at 480 V, with external line choke of 0.5 mH 38.1 A 70 % at 480 V, with external line choke of 0.5 mH

switching frequency

4 kHz

Overvoltage category

III

Maximum leakage current

30 mA

Output voltage

<= power supply voltage

electrical isolation

Between power and control

Type of cable

Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR

Electrical connection

Terminal, clamping capacity: 8 mm², AWG 8 (CN8)

Tightening torque

CN8: 3.8 N.m

Discrete input number

2 capture discrete input(s)

Discrete input type

Capture (CAP terminals)

Sampling duration

0.25 ms

Discrete input voltage

24 V DC for capture

Discrete input logic

Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1

Response time

<= 5 ms compliment of STO_A, compliment of STO_B

Discrete output number

3

Discrete output type

Logic output(s) (DO)24 V DC

Discrete output voltage

<= 30 V DC

Discrete output logic

Positive or negative (DO) conforming to EN/IEC 61131-2

Contact bounce time

<= 1 ms for compliment of STO_A, compliment of STO_B

Braking current

50 mA

Response time on output

250 µs (DO) for discrete output(s)

Control signal type

Pulse train output (PTO) RS422 <500 kHz <100 m

Protection type

Against reverse polarity: inputs signal

Safety function

STO (safe torque off), integrated

Safety level

SIL 3 conforming to EN/IEC 61508

Communication interface

Modbus, integrated Profinet, with separated communication card

Connector type

RJ45 (labelled CN7) for Modbus

commissioning port

2-wire RS485 multidrop for Modbus

Transmission rate

9600, 19200, 38400 bps for bus length of 40 m for Modbus

Number of addresses

1…247 for Modbus

Status LED

1 LED (red) servo drive voltage

Signalling function

Display of faults 7 segments

Marking

CE

Operating position

Vertical +/- 10 degree

Product compatibility

Servo motor BMH (190 mm, 1 motor stacks) Servo motor BMH (190 mm, 2 motor stacks) Servo motor BMH (190 mm, 3 motor stacks) Servo motor BMH (190 mm, 4 motor stacks)

Width

180 mm

height

385 mm

Depth

240 mm

Net weight

9.6 kg

Electromagnetic compatibility

Conducted EMC, class A group 1 conforming to EN 55011

Standards

EN/IEC 61800-3

product certifications

CSA

IP degree of protection

IP20 conforming to EN/IEC 60529

Vibration resistance

1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60028-2-27

Pollution degree

2 conforming to EN/IEC 61800-5-1

Environmental characteristic

Classes 3C1 conforming to IEC 60721-3-3

Relative humidity

Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3

Ambient air temperature for operation

0…50 °C conforming to UL

Ambient air temperature for storage

-25…70 °C

Type of cooling

Integrated fan

Operating altitude

<= 1000 m without derating

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

34.5 cm

Package 1 Width

30.0 cm

Package 1 Length

56.0 cm

Package 1 Weight

10.348 kg

Unit Type of Package 2

P06

Number of Units in Package 2

2

Package 2 Height

80.0 cm

Package 2 Width

80.0 cm

Package 2 Length

60.0 cm

Package 2 Weight

35.0 kg

Warranty

18 months

Document Links

Datasheet