A9C30315
ACTI9 ITLI 16A 1NO 1NF 130VAC 50-60HZ 48
Trade Price
POA
Per
1
Unit
Pack Quantity
Information
This Acti9 iTLi is a modular impulse relay. It is a changeover contact with 1 normally open and 1 normally close contact. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 130VAC or 48VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 100 switching operations/day or 5 switching operations/minute. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
Technical Specifications
range of product
Acti9
Product name
Acti9 iTL
Product or component type
Impulse relay
Device short name
iTLi
Device application
Changeover relay
Poles
2P
Pole contact composition
1 NO + 1 NC
[In] rated current
16 A
Network type
AC
[Uc] control circuit voltage
130 V AC 50/60 Hz 48 V DC
Network frequency
50/60 Hz
[Ue] rated operational voltage
250 V AC 50/60 Hz
Control type
Coil deconnection Remote and manual control
control signal type
Impulse
Switching frequency
100 switching operations/day 5 switching operations/minute
impulse duration
50 ms...1 s
Remote control type
Illuminated push-button 3 mA
Local signalling
ON/OFF indication
Mounting mode
Fixed
mounting support
DIN rail
9 mm pitches
2
height
84 mm
Width
18 mm
Depth
60 mm
Electrical durability
AC-21: 200000 cycles AC-22: 100000 cycles
Connections - terminals
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid with cable end Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible with ferrule
Wire stripping length
11 mm
Tightening torque
1 N.m
Range compatibility
Acti 9 iATEt Acti 9 iATLc Acti 9 iATLc+s Acti 9 iATLm Acti 9 iATLs Acti 9 iETL iTL 16 Acti 9 iATLc+c
standards
EN 669-2-2 EN 669-1
product certifications
GOST CCC
Quality labels
NF KEMA CEBEC VDE IMQ
Noise level
60 dB
IP degree of protection
IP20 conforming to IEC 60529 (on opening) IP40 conforming to IEC 60529 (in enclosure)
Pollution degree
3
Tropicalisation
2
Relative humidity
95 % at 55 °C
Ambient air temperature for operation
-20…50 °C
Ambient air temperature for storage
-40…70 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
1.8 cm
Package 1 Width
7.0 cm
Package 1 Length
8.5 cm
Package 1 Weight
113.0 g
Unit Type of Package 2
BB1
Number of Units in Package 2
12
Package 2 Height
8.0 cm
Package 2 Width
9.0 cm
Package 2 Length
22.5 cm
Package 2 Weight
1.434 kg
Unit Type of Package 3
S03
Number of Units in Package 3
144
Package 3 Height
30.0 cm
Package 3 Width
30.0 cm
Package 3 Length
40.0 cm
Package 3 Weight
17.695 kg
Warranty
18 months
Document Links
Datasheet