BRS3ADW850ABA
LEXIUM STPPR MTR SIZE 110 19.7 NM
Trade Price
£1,187.17
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Lexium SD3 range, an offer of stepper motors for motion control. The 6-pole stepper motor with 19mm parallel key shaft, centering collar of 56mm, without holding brake and second shaft end. It is a 3-phase stepper motor with a rated current of 4.75A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with terminal box for electrical connection. The shaft dimensions are 19mm (diameter) x 40mm (length). It offers service life of about 20,000 hours (bearing). It is an IP41 and IP56 rated product. Its dimensions are 228mm (length) and the centering collar dimensions are 3mm (depth) x 56mm (diameter) with 125.86mm mounting hole. It weighs 11.2kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, food and beverage applications. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 motor drives. It supports 110mm flange mount with a natural convection cooling system. It has 4 mounting holes with 9mm diameter. The SD3 is a universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Lexium SD3, three-phase range up to 19.7Nm with high accuracy and high torque at low rotation speeds.
Technical Specifications
range compatibility
Lexium SD3
Product or component type
Motion control motor
Device short name
BRS3
Maximum mechanical speed
3000 rpm
Motor type
3-phase stepper motor
Number of motor poles
6
Supply voltage limits
230 V AC 325 V DC
mounting support
Flange
Motor flange size
110 mm
Length
228 mm
Centring collar diameter
56 mm
Centring collar depth
3 mm
Number of mounting holes
4
Mounting holes diameter
9 mm
Circle diameter of the mounting holes
125.86 mm
Electrical connection
Terminal box
Holding brake
Without
Shaft end
Parallel key
Second shaft
Without second shaft end
Shaft diameter
19 mm
Shaft length
40 mm
Nominal torque
16.5 N.m
Peak stall torque
16.45 N.m
Continuous stall torque
16.45 N.m
Holding torque
19.7 N.m
Rotor inertia
16 kg.cm²
Resolution
1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
accuracy error
+/- 6 arc min
Maximum starting frequency
4.7 kHz
[In] rated current
4.75 A
Resistance
1.9 Ohm (winding)
Time constant
22 ms
Maximum radial force Fr
150 N (second shaft end) 300 N (first shaft end)
Maximum axial force Fa
330 N (tensile force) 60 N (force pressure)
Service life in hours
20000 h (bearing)
Angular acceleration
200000 rad/s²
Net weight
11.2 kg
standards
IEC 60072-1 EN 50347
Type of cooling
Natural convection
Ambient air temperature for operation
-25…40 °C
Ambient air temperature for storage
-25…70 °C
Operating altitude
<= 1000 m without power derating
Relative humidity
15…85 % without condensation
Vibration resistance
20 m/s² maximum A conforming to EN/IEC 60034-14
IP degree of protection
IP41 shaft bushing: conforming to EN/IEC 60034-5 IP56 total except shaft bushing: conforming to EN/IEC 60034-5
Temperature class
F winding conforming to IEC/EN 60034-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
19.000 cm
Package 1 Width
40.000 cm
Package 1 Length
22.500 cm
Package 1 Weight
12.162 kg
Unit Type of Package 2
P06
Number of Units in Package 2
12
Package 2 Height
75.000 cm
Package 2 Width
60.000 cm
Package 2 Length
80.000 cm
Package 2 Weight
154.444 kg
Warranty
18 months
Document Links
Datasheet