BRS368W130ACA
LEXIUM STPPR MTR SIZE 60 1.7 NM 3
Trade Price
£542.92
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 8mm smooth shaft, centring collar of 38mm, without holding brake and second shaft end. It provides a high holding torque, that makes it an optimum solution in applications such pick and place, etc. It is a 3-phase stepper motor with a rated current of 0.9A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with connector for electrical connection. The shaft dimensions are 8mm (Diameter) x 21mm (Length). It offers service life of about 20000h (bearing). It is an IP41 and IP56 rated product. Its dimensions are 116mm (Length) x 57.2mm (Width), centring collar dimensions are 1.6mm (Depth) x 38mm (Diameter) with 66.6mm circle diameter of the mounting hole. It weighs 2kg. This stepper motor is particularly suitable for short-distance positioning, such as labelling. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 stepper drives. It supports 57.2mm flange mount with a natural convection cooling system. 4 mounting holes with 5.2mm diameter. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. The 3-phase stepper motor with a very high-power density. It carries out precise step-by-step movements that are controlled by a drive. The 3-phase stepper motor is accurate, powerful and sturdy and excel with a high-power density.
Technical Specifications
range compatibility
Lexium SD3
Product or component type
Motion control motor
Device short name
BRS3
Maximum mechanical speed
3000 rpm
Motor type
3-phase stepper motor
Number of motor poles
6
Supply voltage limits
230 V AC 325 V DC
mounting support
Flange
Motor flange size
57.2 mm
Length
116 mm
Centring collar diameter
38 mm
Centring collar depth
1.6 mm
Number of mounting holes
4
Mounting holes diameter
5.2 mm
Circle diameter of the mounting holes
66.6 mm
Electrical connection
Connector
Holding brake
Without
Shaft end
Smooth shaft
Second shaft
Without second shaft end
Shaft diameter
8 mm
Shaft length
21 mm
Nominal torque
1.5 N.m
Peak stall torque
1.53 N.m
Continuous stall torque
1.53 N.m
Holding torque
1.7 N.m
Rotor inertia
0.38 kg.cm²
Resolution
1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
accuracy error
+/- 6 arc min
Maximum starting frequency
8.5 kHz
[In] rated current
0.9 A
Resistance
25 Ohm (winding)
Time constant
4.6 ms
Maximum radial force Fr
25 N (second shaft end) 50 N (first shaft end)
Maximum axial force Fa
100 N (tensile force) 8.4 N (force pressure)
Service life in hours
20000 h (bearing)
Angular acceleration
200000 rad/s²
Net weight
2 kg
standards
EN 50347 IEC 60072-1
Type of cooling
Natural convection
Ambient air temperature for operation
-25…40 °C
Ambient air temperature for storage
-25…70 °C
Operating altitude
<= 1000 m without power derating
Relative humidity
15…85 % without condensation
Vibration resistance
20 m/s² maximum A conforming to EN/IEC 60034-14
IP degree of protection
IP41 shaft bushing: conforming to EN/IEC 60034-5 IP56 total except shaft bushing: conforming to EN/IEC 60034-5
Temperature class
F winding conforming to IEC/EN 60034-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
10.500 cm
Package 1 Width
17.000 cm
Package 1 Length
24.000 cm
Package 1 Weight
1.558 kg
Unit Type of Package 2
P06
Number of Units in Package 2
45
Package 2 Height
75.000 cm
Package 2 Width
60.000 cm
Package 2 Length
80.000 cm
Package 2 Weight
83.110 kg
Warranty
18 months
Document Links
Datasheet