ILE2K661PC1A8
LXMILE BLDC MOT24 48VETHIP GEAR
Trade Price
£1,954.59
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated EtherNet/IP communication interface and hole shaft without holding brake. The brushless DC motor with a rated supply voltage of 24V, 48V DC, a peak current consumption of 7000mA and a nominal speed of 35RPM at 48V. It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 229mm (length) x 66mm (width) and the centering collar dimensions are 2mm (depth) x 36mm (diameter). It weighs 2.3kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 66mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
Technical Specifications
Range of product
Lexium integrated drive
Product or component type
Motion integrated drive
Device short name
ILE
Motor type
Brushless DC motor
Number of motor poles
6
Network number of phases
Single phase
[Us] rated supply voltage
48 V 24 V
Network type
DC
Communication interface
Ethernet/IP, integrated
Length
229 mm
Winding type
Medium speed of rotation and medium torque
Electrical connection
Industrial connector
Holding brake
Without
Gear box type
Worm gear, 3 stages
Reduction ratio
115:1 (3675:32)
Nominal speed
35 rpm at 24 V 35 rpm at 48 V
Nominal torque
10.6 N.m at 24 V 10.6 N.m at 48 V
Transmission rate
125, 250, 500 kbauds
mounting support
Flange
Motor flange size
66 mm
Number of motor stacks
1
Centring collar diameter
36 mm
Number of mounting holes
2
Mounting holes diameter
4.4 mm
Feedback type
BLDC encoder
Shaft end
Hole
Second shaft
Without second shaft end
Supply voltage limits
18…55.2 V
Current consumption
7000 mA peak 5500 mA maximum continuous
Associated fuse rating
16 A
Commissioning interface
RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
input/output type
4 signals (each be used as input or output)
Voltage state 0 guaranteed
-3...4.5 V
Voltage state 1 guaranteed
15...30 V
Discrete input current
10 mA at 24 V on/STO_A for safety input 3 mA at 24 V on/STO_B for safety input 2 mA at 24 V for 24 V signal interface
Discrete output voltage
23...25 V
Maximum switching current
100 mA per output 200 mA total
Protection type
Overload of output voltage Safe torque off Short circuit of the output voltage
Maximum supply current
0.1 A (power stage disabled) 6.8 A at 24 V 2.9 A at 48 V
Nominal output power
37 W at 24 V 39 W at 48 V
Peak stall torque
24.72 N.m at 24 V 24.72 N.m at 48 V
Continuous stall torque
14 N.m
Detent torque
16.7 N.m
Speed feedback resolution
12 points/turn motor 0.26° gearbox output
accuracy error
+/- 1 point
Rotor inertia
1980 kg.cm²
Maximum mechanical speed
44 rpm
Maximum radial force Fr
200 N
Maximum axial force Fa
80 N
Service life in hours
9000 h bearing
Marking
CE
Type of cooling
Natural convection
Net weight
2.3 kg
standards
EN/IEC 50178 EN 61800-3:2001, second environment IEC 60072-1 EN 61800-3 : 2001-02 EN 50347 EN/IEC 61800-3 IEC 61800-3, Ed 2
product certifications
TÜV UL cUL
Ambient air temperature for operation
40…55 °C (with power derating of 2 % per °C) 0…40 °C (without derating)
Permissible ambient air temperature around the device
105 °C power amplifier 110 °C motor
Ambient air temperature for storage
-25…70 °C
Operating altitude
<= 1000 m without derating
Relative humidity
15…85 % without condensation
Vibration resistance
20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
Shock resistance
150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
IP degree of protection
IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
11.0 cm
Package 1 Width
19.0 cm
Package 1 Length
39.5 cm
Package 1 Weight
2.646 kg
Warranty
18 months
Document Links
Datasheet