LXM28SUA5M3X
Lexium28 Sercos drive - 50W
Trade Price
£546.57
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features an HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. The motion servo drives embed one pulse-train-input PTI and one pulse train-output PTO interfaces. It is a motion servo drive with a rated supply voltage of 220V (single phase and three phase), an output current of 2.0A at 220V, a power of 50W/0.067HP and a continuous power of 50W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for Sercos integrated communication interface. It is an IP20 rated product. Its dimensions are 55mm (Width) x 146mm (Depth) x 150mm (Height). It weighs 1kg. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with motor BCH2 (40mm, 1 motor stacks) at 50W. Mount this servo drive in a vertical position (more or less 10°). This is required for cooling the device. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 motors, optimized servo bundles for compact machines.
Technical Specifications
Range of product
Lexium 28
Product or component type
Motion servo drive
Device short name
LXM28S
Format of the drive
Compact housing
Line current
0.8 A 262.8 % at 220 V, single phase 0.8 A 227 % at 220 V, three phase
Network number of phases
Single phase Three phase
[Us] rated supply voltage
200...240 V (- 10...15 %) for three phase 200...240 V (- 20...15 %) for single phase
Supply voltage limits
200…255 V three phase 170…255 V single phase
Supply frequency
50/60 Hz - 5...5 %
Network frequency
47.5...63 Hz
EMC filter
Without EMC filter
Continuous output current
0.64 A at 16 kHz
Output current 3s peak
2 A at 220 V
Continuous power
50 W at 220 V
Nominal power
0.05 kW at 220 V 16 kHz
Switching frequency
16 kHz
Overvoltage category
III
Maximum leakage current
1.3 mA
Output voltage
<= power supply voltage
Electrical isolation
Between power and control
Type of cable
Shielded motor cable (temperature: 0…55 °C) copper
Electrical connection
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)
Discrete input number
8 programmable (CN1) 2 fast capture (CN1) 1 safety function STO (CN9)
Discrete input voltage
24 V DC for logic
Discrete input logic
Positive or negative (CN1)
Discrete output number
4 logic output (CN1) at 12...24 V DC 1 pulse train output (PTO) (CN1)
Discrete output voltage
12...24 V DC
Discrete output logic
Positive or negative (CN1)
Control signal type
Servo motor encoder feedback CN2
Protection type
Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor
Safety function
STO (safe torque off), integrated
Safety level
SIL 2 conforming to IEC 61800-5-2: 2007 SIL 2 conforming to IEC 61508-1: 2010 PL d/category 3 conforming to EN/ISO 13849-1: 2008 SIL 2 conforming to EN/ISO 13849-1: 2009/AC SIL 2 conforming to EN 60204-1: 2006 SIL 2 conforming to EN 60204-1: 2009/A1 SIL 2 conforming to EN 60204-1: 2010/AC SIL 2 conforming to IEC 62061: 2012
Communication interface
Modbus, integrated SERCOS III, integrated
Connector type
RJ45 (CN3) RJ45 (CN4)
Method of access
Slave
Transmission rate
9600 bauds...115200 bauds (automatic detection) for bus length of 100 m
Status LED
1 LED (red) charge 1 LED (green) RUN 1 LED (red) error
Signalling function
Servo status and fault codes five 7-segment display units
Marking
CE CSA CULus
Type of cooling
Natural convection
Operating position
Vertical
Product compatibility
Servo motor BCH2 (40 mm, 1 motor stacks) at 50 W
Width
55 mm
height
150 mm
Depth
146 mm
Net weight
1 kg
Output current 3s peak 2
2 A at 220 V
Output current 3s peak 3
2 A at 220 V
Electromagnetic compatibility
Conducted emission - test level: level 3 category C3 conforming to EN/IEC 61800-3
standards
EN/IEC 61800-5-1
product certifications
CSA CE cULus
IP degree of protection
IP20
Vibration resistance
3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance
10 gn, type I conforming to IEC 60721-3-3
Relative humidity
5…95 % without condensation
Ambient air temperature for operation
0…55 °C
Ambient air temperature for storage
-25…65 °C
Operating altitude
<= 1000 m without derating > 1000...2000 m 1 % per 100 m
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.5 cm
Package 1 Width
23.0 cm
Package 1 Length
23.7 cm
Package 1 Weight
1.283 kg
Unit Type of Package 2
S03
Number of Units in Package 2
5
Package 2 Height
30.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
7.041 kg
Warranty
18 months
Document Links
Datasheet