BCH2MR3013CA6C
BCH2 MOTOR 180MM 3000W WITH
Trade Price
£1,210.73
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 3000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of torque (1000RPM/1500RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 16.49A and a continuous power of 3000W. The shaft dimensions are 35mm (Diameter) x 79mm (Length). It is furnished with MIL connector for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 202mm (Length) x 180mm (Width), centring collar dimensions are 4mm (Depth) x 114.3mm (Diameter) with 200mm circle diameter of the mounting hole. It weighs 18.5kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 180mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Technical Specifications
range compatibility
Lexium 28
Product or component type
Servo motor
Device short name
BCH2
Maximum mechanical speed
3000 rpm
[Us] rated supply voltage
220 V
Network number of phases
Three phase
Continuous stall current
16.49 A
Continuous stall torque
19.1 N.m for LXM26D at 19.8 A, 220 V, three phase 19.1 N.m for LXM28... at 19.8 A, 220 V, three phase
Continuous power
3000 W
Peak stall torque
57.29 N.m for LXM26D at 19.8 A, 220 V, three phase 57.29 N.m for LXM28... at 19.8 A, 220 V, three phase
Nominal output power
3000 W for LXM26D at 19.8 A, 220 V, three phase 3000 W for LXM28... at 19.8 A, 220 V, three phase
Nominal torque
19.1 N.m for LXM26D at 19.8 A, 220 V, three phase 19.1 N.m for LXM28... at 19.8 A, 220 V, three phase
Nominal speed
1500 rpm for LXM26D at 19.8 A, 220 V, three phase 1500 rpm for LXM28... at 19.8 A, 220 V, three phase
Maximum current Irms
58.4 A for LXM26D at 3 kW, 220 V 58.4 A for LXM28... at 3 kW, 220 V
Maximum permanent current
18.8 A
Product compatibility
LXM26D servo drive motor at 3 kW, 220 V, three phase LXM28... servo drive motor at 3 kW, 220 V, three phase
Shaft end
Keyed
Shaft diameter
35 mm
Shaft length
79 mm
Key width
10 mm
Feedback type
20 bits single turn absolute encoder
Holding brake
Without
mounting support
Asian standard flange
Motor flange size
180 mm
Electrical connection
Connector MIL
Torque constant
1.16 N.m/A at 20 °C
Back emf constant
70 V/krpm at 20 °C
Rotor inertia
53.56 kg.cm²
Stator resistance
0.234 Ohm at 20 °C
Stator inductance
4.9 mH at 20 °C
Stator electrical time constant
20.94 ms at 20 °C
Maximum radial force Fr
1200 N at 1500 rpm
Maximum axial force Fa
497 N
Brake pull-in power
49.6 W
Type of cooling
Natural convection
Length
202 mm
Number of motor stacks
2
Centring collar diameter
114.3 mm
Centring collar depth
4 mm
Number of mounting holes
4
Mounting holes diameter
13.5 mm
Circle diameter of the mounting holes
200 mm
Distance shaft shoulder-flange
4 mm
Net weight
18.5 kg
IP degree of protection
IP50 IM V3 IP65 IM B5, IM V1
Ambient air temperature for operation
-20…40 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
25.3 cm
Package 1 Width
30.0 cm
Package 1 Length
56.6 cm
Package 1 Weight
21.64 kg
Warranty
18 months
Document Links
Datasheet