LXM28AU15M3X
LXM28 CANIO DRIVE 1/3PH230V1.5KW
Trade Price
£945.67
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 7A, nominal power of 1.5kW and continuous power of 1500W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 170mm (depth) x 150mm (height). It weighs 1.2kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 3 motor stacks) at 1500W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Technical Specifications
Range of product
Lexium 28
Product or component type
Motion servo drive
Device short name
LXM28A
Format of the drive
Compact housing
Line current
10 A 166.6 % at 220 V, single phase 10 A 144.8 % at 220 V, three phase
Network number of phases
Three phase Single phase
[Us] rated supply voltage
200...240 V (- 10...15 %) for three phase 200...240 V (- 20...15 %) for single phase
Supply voltage limits
200…255 V three phase 170…255 V single phase
Supply frequency
50/60 Hz - 5...5 %
Network frequency
47.5...63 Hz
EMC filter
Without EMC filter
Continuous output current
7 A at 16 kHz
Output current 3s peak
21 A at 220 V
Continuous power
1500 W at 220 V
Nominal power
1.5 kW at 220 V 16 kHz
Switching frequency
16 kHz
Overvoltage category
III
Maximum leakage current
4.5 mA
Output voltage
<= power supply voltage
Electrical isolation
Between power and control
Type of cable
Shielded motor cable (temperature: 0…55 °C) copper
Electrical connection
Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (L1-L2) Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (R, S, T) Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (U, V, W, PE) Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (PA/+, PBe)
Discrete input number
8 programmable (CN1) 1 pulse train input (PTI) (CN1) 2 fast capture (CN1) 1 safety function STO (CN9)
Discrete input voltage
24 V DC for logic
Discrete input logic
Positive or negative (CN1)
Discrete output number
5 logic output (CN1) at 12...24 V DC 1 pulse train output (PTO) (CN1)
Discrete output voltage
12...24 V DC
Discrete output logic
Positive or negative (CN1)
analogue input number
2
Absolute accuracy error
0.1 %
Analogue input type
V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm, resolution: 14 bits T_REF voltage analog input
Control signal type
Servo motor encoder feedback CN2
Protection type
Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor
Safety function
STO (safe torque off), integrated
Safety level
SIL 2 conforming to IEC 61800-5-2: 2007 SIL 2 conforming to IEC 61508-1: 2010 PL d/category 3 conforming to EN/ISO 13849-1: 2008 SIL 2 conforming to EN/ISO 13849-1: 2009/AC SIL 2 conforming to EN 60204-1: 2006 SIL 2 conforming to EN 60204-1: 2009/A1 SIL 2 conforming to EN 60204-1: 2010/AC SIL 2 conforming to IEC 62061: 2012
Communication interface
CANopen, integrated CANmotion, integrated
Connector type
RJ45 (CN4) for CANopen, CANmotion
Method of access
Slave
Transmission rate
250 kbit/s for bus length of 100…250 m for CANopen, CANmotion 500 kbit/s for bus length of 4…100 m for CANopen, CANmotion 1 Mbit/s for bus length of 4 m for CANopen, CANmotion
Number of addresses
1…127 for CANopen, CANmotion
Physical interface
RS485 for Modbus Serial line slave
Status LED
1 LED (red) charge 1 LED (green) RUN 1 LED (red) error
Signalling function
Servo status and fault codes five 7-segment display units
Marking
CULus CSA CE
Type of cooling
Integrated fan
Operating position
Vertical
Product compatibility
Servo motor BCH2 (130 mm, 3 motor stacks) at 1500 W
Width
55 mm
height
150 mm
Depth
170 mm
Net weight
1.2 kg
Output current 3s peak 2
21 A at 220 V
Output current 3s peak 3
21 A at 220 V
Electromagnetic compatibility
Conducted emission - test level: level 3 category C3 conforming to EN/IEC 61800-3
standards
EN/IEC 61800-5-1
product certifications
CSA cULus CE
IP degree of protection
IP20
Vibration resistance
3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance
10 gn, type I conforming to IEC 60721-3-3
Relative humidity
5…95 % without condensation
Ambient air temperature for operation
0…55 °C
Ambient air temperature for storage
-25…65 °C
Operating altitude
<= 1000 m without derating > 1000...2000 m 1 % per 100 m
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.621 cm
Package 1 Width
22.955 cm
Package 1 Length
23.731 cm
Package 1 Weight
1.49 kg
Unit Type of Package 2
S03
Number of Units in Package 2
5
Package 2 Height
30 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
7.974 kg
Warranty
18 months
Document Links
Datasheet