EVB3S07N4A
Pro AC 7kw T2S 6mA RCDAsi MNX
Trade Price
£930.00
Per
1
Unit
EA
Pack Quantity
1
Information
This EVlink Pro AC product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. It can also be floor-standing, either fixed on a pedestal, or integrated in a kit enclosure. Both pedestal or kit enclosure have to be ordered separately. It can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -30°C and 50°C. The storage temperature is between -40°C and 80°C. The output type is a T2 socket-outlet with shutter (T2S), fixed on the front face of the station. All the contacts of T2S socket-outlet are silver-plated avoiding overheating. The nominal output power is 7.4kW. It is supplied in single-phase (1P+N). The rated charging current is 32A under 220V to 240VAC with a 50Hz to 60Hz frequency. It can be used with a TT, TN-S, TN-C-S or IT earthing system. The charging station is easy to install and to comission. It is recommended at home as well as at fleets, at street or at work. The dimensions are (W) 317mm x (H) 529mm x (D) 153mm. Its product weight is 7.2kg. Its color is dark grey (RAL 7016). It embeds a built-in protection against residual direct current, with a 6mA residual direct current detection device (RDC-DD), and a 30mA A-Si type residual current device (RCD). An MNx under voltage tripping auxiliary is also integrated in the charging station for safety. Moreover, it is necessary to meet EV Ready requirements. The charging station can be fed by cable coming from the rear, the top or the bottom of it. To load an electrical vehicle, the access control is done by a user authentication through RFID or NFC badge. But the charging station can also be used for free access. The load starting can be time-delayed. During the load time, the power can be limited to ensure the continuity of service and optimize the charging time of all the charging station based on a same feeding. It has 2 Ethernet RJ45 ports for LAN connection. The parameters are set up through eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station can be managed in standalone or in clustered architecture. The OCCP 1.6 communication protocol is used to connect to the supervision device.The available services are the charge detail records, the diagnosis capabilities and the load management. The charging station has the CE and EV Ready certification. The firmware of EVlink Pro AC is maintained until 2 years after the end of commercialisation.
Technical Specifications
Range
EVlink
Product name
EVlink Pro AC
Product or component type
Charging station
Device short name
EVB3
Communication network type
Ethernet Bluetooth 3G/4G modem optional Modbus TCP
Connector type
2 RJ45 for Ethernet LAN connection
Communication port protocol
OCPP 1.6
Communication service
JSON smart charging for OCPP 1.6
Operating mode
Clustered architecture Standalone
Function available
Charge detail records Load management Diagnosis capabilities Software updates
Range compatibility
EVlink (EcoStruxure EV Charging Expert) EVlink (EVlink Pro AC Metal) EcoStruxure (EcoStruxure EV Advisor)
Type of installation
Indoor Outdoor
Provided equipment
1 residual direct current detection device (RDC-DD) integrated 1 residual current device (RCD) integrated 1 MNx auxiliary contact integrated 1 energy meter
Accuracy class of energy meter
Class 1
Protection device type
Residual direct current detection device (RDC-DD) - 6 mA Residual current device (RCD) - 30 mAtype A-SI (Super Immunised)
Poles description
1P + N for power circuit
Mounting mode
Wall-mounted Wall-mounted (kit enclosure) Floor-standing (pedestal) Floor-standing (kit enclosure)
Mounting support
Pedestal, to be ordered separately Kit enclosure, to be ordered separately
Cable entry
Bottom entry Top entry Rear entry
[Us] rated supply voltage
220...240 V AC 50/60 Hz
Nominal output power
7.4 kW 32 A 222...240 V
Socket number
1
Output type
Front side T2 with shutter socket-outlet / silver plated contacts
Access control system
Badge RFID conforming to ISO/IEC 14443 A and B Badge RFID conforming to ISO/IEC 15693 Badge NFC Free access
RFID compatible technology
MIFARE Classic MIFARE Ultralight MIFARE Plus
NFC frequency
13.56 MHz
NFC tag type
Type 1 Type 2 Type 4 Type 5
Earthing system
TT TN-S TN-C-S Compatible IT with additional isolation transformer on the power supply
Number of inputs
3
Input type
Binary for power limitation closing contact Binary for delayed charging closing contact Binary for vehicle detection closing contact
Control type
can be controlled by remote
Local signalling
1 green LED light strip, function: available 1 blue LED light strip, function: charging 1 red LED light strip, function: fault indication
Standards
EN/IEC 61851-1:ed. 3 EN/IEC 62196-1:ed. 2 EN/IEC 62196-2:ed. 1 EN 61000-6-2:2019 EN 61000-6-3:2007 EN 61000-6-3:2011/A1 IEC 60884-1 NF C 61314 ISO 15118
product certifications
EV Ready CE
IP degree of protection
IP55
IK degree of protection
IK10
Ambient air temperature for operation
-30…45 °C
Ambient air temperature for storage
-40…80 °C
Relative humidity
5…95 %
Operating altitude
2000 m without derating
Height
529 mm
Width
317 mm
Depth
153 mm
Net weight
7.2 kg
Colour
Front face: white (RAL 9003) Housing: dark grey (RAL 7016) Back part: black (RAL 9005)
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
28.5 cm
Package 1 Width
35.5 cm
Package 1 Length
57.5 cm
Package 1 Weight
8.53 kg
Unit Type of Package 2
P06
Number of Units in Package 2
4
Package 2 Height
73.0 cm
Package 2 Width
60.0 cm
Package 2 Length
80.0 cm
Package 2 Weight
40.0 kg
Warranty
18 months
Document Links
Datasheet