A9A26914
Acti9 iOF botm wiring 2-100mA aux
Trade Price
£45.37
Per
1
Unit
EA
Pack Quantity
1
Information
This Acti9 electrical auxiliary is a modular OC contact used as remote indication ot the position of the associated device. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 250VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 1 position switch with contacts type 1 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA, iC60 RCBO and iKQE RCBO. This OC contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA and iDD40. The iOF is either used for device short name or compatibility code. It has a screw clamp terminal connection at bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm² to 4mm². It has a screw clamp terminal connection at bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm² to 2.5mm². It has a screw clamp terminal connection at bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm². It has a screw clamp terminal connection at bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm². The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 86mm x (D) 73mm. The product colour is white (RAL 9003). The pollution degree is 3. The level of tropicalisation is treatment 2. The tightening torque of connection is 1N.m (bottom) for PZ1 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20. The operating temperature is from -25°C to +70°C. The storage temperature is from -40°C to +85°C. This product complies with EN/IEC 60947-5-1 and EN/IEC 60947-5-4 standards. This product is certified with CE and UKCA standards.
Technical Specifications
range of product
Acti9
Product or component type
OC contact
Device short name
iOF
Signal contacts composition
1 C/O
[In] rated current
2…100 mA at 24...240 V, AC 50/60 Hz 2…100 mA at 24 V, DC 2…100 mA at 48 V, DC 2…100 mA at 60 V, DC 2…100 mA at 130 V, DC 2…100 mA at 220 V, DC
9 mm pitches
1
Operating mode
Daisy chain up to 100 devices
[Ui] rated insulation voltage
500 V
[Uimp] rated impulse withstand voltage
4 kV
Mounting mode
Clip-on
Mounting location
Left side of circuit-breaker
mounting support
DIN rail
Comb busbar and distribution block compatibility
Top: YES
height
86 mm
Width
9 mm
Depth
73 mm
Net weight
32 g
Colour
White
Connections - terminals
Screw clamp terminal (bottom) 1 cable(s) 1…4 mm² - rigid Screw clamp terminal (bottom) 1 cable(s) 0.5…2.5 mm² - flexible Screw clamp terminal (bottom) 2 cable(s) 2.5 mm² - rigid Screw clamp terminal (bottom) 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length
10 mm
Tightening torque
1 N.m bottom
standards
EN/IEC 60947-5-1 EN/IEC 60947-5-4 GB/T 14048.5 GB/T 14048.17
product certifications
CE UKCA
Quality labels
EAC CCC
IP degree of protection
IP20
Pollution degree
3
Tropicalisation
2
Relative humidity
95 % at 55 °C
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2.100 cm
Package 1 Width
8.000 cm
Package 1 Length
9.300 cm
Package 1 Weight
40.000 g
Unit Type of Package 2
BB1
Number of Units in Package 2
12
Package 2 Height
8.500 cm
Package 2 Width
10.000 cm
Package 2 Length
27.000 cm
Package 2 Weight
570.000 g
Unit Type of Package 3
S03
Number of Units in Package 3
120
Package 3 Height
30.000 cm
Package 3 Width
30.000 cm
Package 3 Length
40.000 cm
Package 3 Weight
6.401 kg
Warranty
18 months
Document Links
Datasheet