SMT2200RMI2U
SMART UPS 2200VA 230V IN/OUT
Trade Price
£2,167.50
Per
1
Unit
EA
Pack Quantity
1
Information
This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. The 2200VA line interactive 2U rackmount UPS provides pure sine wave power to support critical electronics during power disruptions. It comes with IEC 320 C20 input, BS1363A British, and Schuko CEE 7/EU1-16P input cables, 8x IEC 320 C13 and 1x IEC 320 C19 outlets, and 3x IEC jumper cables. It has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. The UPS can connect to EcoStruxure IT or third-party centralized management platforms It provides surge protection against lightning strikes, power sags, brownouts and surges. The SMT UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty. It is compatible with a dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications.
Technical Specifications
Presentation
Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Lead time
Usually in Stock
Main Input Voltage
230 V
Other Input Voltage
220 V 240 V
Main Output Voltage
230 V
Other Output Voltage
220 V 240 V
Rated power in W
1980 W
Rated power in VA
2200 VA
Input Connection Type
BS1363A British IEC 320 C20 Schuko CEE 7 / EU1-16P
output connection type
8 IEC 320 C13 3 IEC Jumpers 1 IEC 320 C19
Number of rack unit
2U
Cable length
2.00 m
Number of cables
1
Battery type
Lead-acid battery
Provided equipment
USB cable Documentation CD Installation guide Rack mounting hardware Rack mounting support rails Smart UPS signalling RS-232 cable
Run Time
View Runtime Graph
Efficiency
View Efficiency Graph
Additional information
Configurable for 220 : 230 or 240 nominal output voltage
Extended runtime
0
Number of battery filled slots
0
Number of battery free slots
0
Battery recharge time
3 h
Number of battery replacement quantity
1
Battery life
3…5 year(s)
Replacement battery
RBC43
Battery charger power
169 W rated
Number of power module filled slots
0
Number of power module free slots
0
Redundant
No
height
8.6 cm
Width
48 cm
Depth
68.3 cm
Net weight
42.31 kg
Mounting location
Front
Mounting preference
No preference
Mounting mode
Rack-mounted
Two post mountable
0
USB compatible
No
Input voltage limits
151...302 V adjustable 160...286 V
Network frequency
50/60 Hz +/- 3 Hz auto-sensing
Maximum configurable power in VA
2200 VA
Maximum configurable power in W
1980 W
Transfer time
4 ms typical : 8 ms maximum
UPS type
Line interactive
Wave type
Sine wave
Output frequency
50/60 Hz +/- 3 Hz sync to mains
product certifications
CE EAC IRAM RCM VDE
Marking
GS Mark
Standards
EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Acoustic level
55 dBA
Heat dissipation
215 Btu/h
Operating altitude
0...10000 ft
ambient air temperature for operation
0…40 °C
Ambient air temperature for storage
-15…45 °C
Storage altitude
0.00…15240.00 m
Relative humidity
0…95 %
Storage Relative Humidity
0…95 %
Control panel
LED status display with on line : on battery : replace battery and overload indicators
Free slots
1
Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Surge energy rate
375 J
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
25.4 cm
Package 1 Width
60 cm
Package 1 Length
98 cm
Package 1 Weight
49.73 kg
Unit Type of Package 2
P12
Number of Units in Package 2
4
Package 2 Height
110 cm
Package 2 Width
80 cm
Package 2 Length
120 cm
Package 2 Weight
230 kg
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
Document Links
Datasheet