SRTG10KXLI
APC Smrt-UPS RT 10kVA
Trade Price
£11,660.77
Per
1
Unit
EA
Pack Quantity
1
Information
This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 10kVA on-line rack/tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with hard wire 3-wire (1P+N+E) input, 2x IEC 320 C13, 1x IEC 320 C19 and Hard wire 3-wire (H+N+E) outlets. The UPS has an embedded Network Management Card for UPS network-based monitoring and management. The UPS comes with PowerChute Network Shutdown that provides graceful shutdown of physical servers, virtual machines, and HCI clusters. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS is compatible with SRTGRK1 rail kit sold separately.
Technical Specifications
Lead time
Usually in Stock
Main Input Voltage
230 V
Other Input Voltage
220 V 240 V
Main Output Voltage
230 V
Other Output Voltage
220 V 240 V
Rated power in W
10000 W
Rated power in VA
10000 VA
output connection type
2 IEC 60320 C13 1 IEC 60320 C19
Output connector type
Hard wire 3-wire (H N + E) 1
Number of rack unit
5U
Battery type
Lead-acid battery
Provided equipment
1 x USB cable 1 x rack mounting brackets 1 x stabilization/wall mounting feet 1 x installation manual 1 x C13-C14 power cord
Run Time
View Runtime Graph
Efficiency
93.5 %
Number of battery filled slots
0
Number of battery free slots
0
Battery recharge time
4 h
Number of battery replacement quantity
2
Additional information
Configurable for 220 : 230 or 240 nominal output voltage
Battery voltage
+/- 96 V
Battery charger power
431 W rated
Battery life
3…5 year(s)
Replacement battery
APCRBC174
Extended runtime
1
UPS type
Double conversion online
Number of power module free slots
0
Number of power module filled slots
0
Redundant
No
Colour
Black
height
21.7 cm
Width
44 cm
Depth
68 cm
Net weight
101.44 kg
Mounting preference
No preference
Mounting mode
Rack-mounted with kit
Two post mountable
0
USB compatible
Yes
Mounting position
Horizontal
Network frequency
40...70 Hz auto-sensing
Number of input connectors
1 hard wire 3-wire (1P + N + E)
Input voltage limits
160...285 V full load
Maximum input current
30 A
Max short time withstand current
40 kA
Maximum configurable power in VA
10000 VA
Maximum configurable power in W
10000 W
Output frequency
50/60 Hz +/- 3 Hz sync to mains
Wave type
Sine wave
Half load runtime
00:11:00 5000 W
Full load runtime
00:03:30 10000 W
Harmonic distortion
Less than 2 %
Crest factor
3 : 1
bypass type
Internal bypass (automatic and manual)
product certifications
CE
Standards
EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018
Ambient air temperature for operation
0…40 °C
Relative humidity
0…95 % non-condensing
Operating altitude
0...3000 m
Ambient air temperature for storage
-15…45 °C
Storage Relative Humidity
0…95 % non-condensing
Storage altitude
0…15000 m
Acoustic level
55 dBA
Heat dissipation
2217.98 Btu/h
IP degree of protection
IP20
Preinstalled device
Network management card 3 with environmental monitoring
Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power off
Yes
Surge energy rate
600 J
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
41.4 cm
Package 1 Width
79 cm
Package 1 Length
59 cm
Package 1 Weight
103.46 kg
Warranty
3 years repair or replace (excluding battery) and 2 years for battery
Document Links
Datasheet