A9C30831
ACTI9 ITL 32A 1NO
Trade Price
£53.39
Per
1
Unit
EA
Pack Quantity
1
Information
This Acti9 iTL is a modular impulse relay. This 1P device has 1 normally open contact. Rated current is 32A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 50000 cycles for AC-21 or 20000 cycles for AC-22. The switching frequency is 100 switching operations/day or 5 switching operations/minute. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
Technical Specifications
range of product
Acti9
Product name
Acti9 iTL
Product or component type
Impulse relay
Device short name
iTL
Device application
Standard
Poles
1P
Pole contact composition
1 NO
[In] rated current
32 A
Network type
AC
[Uc] control circuit voltage
230...240 V AC 50/60 Hz 110 V DC
Network frequency
50/60 Hz
[Ue] rated operational voltage
250 V AC 50/60 Hz
Control type
Coil deconnection Remote and manual control
control signal type
Impulse
Switching frequency
100 switching operations/day 5 switching operations/minute
impulse duration
50 ms...1 s
Remote control type
Illuminated push-button
Local signalling
ON/OFF indication
Mounting mode
Fixed
Mounting support
DIN rail
9 mm pitches
2
Height
84 mm
Width
18 mm
Depth
60 mm
Electrical durability
AC-21: 50000 cycles AC-22: 20000 cycles
Connections - terminals
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule Control circuit: tunnel type terminals 1 cable(s) 1.5…10 mm² rigid Control circuit: tunnel type terminals 1 cable(s) 1.5…10 mm² rigid with cable end Control circuit: tunnel type terminals 1 cable(s) 1.5…10 mm² flexible Control circuit: tunnel type terminals 1 cable(s) 1.5…10 mm² flexible with ferrule
Wire stripping length
11 mm
Tightening torque
1.2 N.m
Range compatibility
Acti 9 iATEt Acti 9 iATL4 Acti 9 iATLc Acti 9 iATLc+s Acti 9 iATLm Acti 9 iATLs Acti 9 iATLz Acti 9 iATLc+c Acti 9 iATL24 Acti 9 iETL iTL 32
Standards
EN 669-1 EN 669-2-2
product certifications
GOST
Quality labels
VDE IMQ KEMA NF CEBEC
Noise level
60 dB
IP degree of protection
IP20 conforming to IEC 60529 (on opening) IP40 conforming to IEC 60529 (in enclosure)
Pollution degree
3
Tropicalisation
2
Relative humidity
95 % at 55 °C
Ambient air temperature for operation
-20…50 °C
Ambient air temperature for storage
-40…70 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2 cm
Package 1 Width
7 cm
Package 1 Length
8.5 cm
Package 1 Weight
110.8 g
Unit Type of Package 2
BB1
Number of Units in Package 2
12
Package 2 Height
8 cm
Package 2 Width
9.3 cm
Package 2 Length
23 cm
Package 2 Weight
1.379 kg
Unit Type of Package 3
S03
Number of Units in Package 3
144
Package 3 Height
30 cm
Package 3 Width
30 cm
Package 3 Length
40 cm
Package 3 Weight
16.882 kg
Warranty
18 months