A9C30211
ACTI9 ITL16A 1NO 48VAC 24VDC 50-60HZ IMP
Trade Price
£52.18
Per
1
Unit
EA
Pack Quantity
1
Information
This Acti9 iTL is a modular impulse relay. This 1P device has 1 normally open contact. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 48VAC or 24VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
Technical Specifications
range of product
Acti9
Product name
Acti9 iTL
Product or component type
Impulse relay
Device short name
iTL
Device application
Standard
Poles
1P
Pole contact composition
1 NO
[In] rated current
16 A
Network type
AC
[Uc] control circuit voltage
48 V AC 50/60 Hz 24 V DC
Network frequency
50/60 Hz
[Ue] rated operational voltage
250 V AC 50/60 Hz
Control type
Coil deconnection Remote and manual control
control signal type
Impulse
Switching frequency
5 switching operations/minute 100 switching operations/day
impulse duration
50 ms...1 s
Remote control type
Illuminated push-button 3 mA
Local signalling
ON/OFF indication
Mounting mode
Fixed
mounting support
DIN rail
9 mm pitches
2
height
84 mm
Width
18 mm
Depth
60 mm
Electrical durability
AC-21: 200000 cycles AC-22: 100000 cycles
Connections - terminals
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid with cable end Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible with ferrule
Wire stripping length
11 mm
Tightening torque
1 N.m
Range compatibility
Acti 9 iATEt Acti 9 iATLc Acti 9 iATLc+s Acti 9 iATLm Acti 9 iATLs Acti 9 iETL iTL 16 Acti 9 iATLc+c
standards
EN 669-1 EN 669-2-2
product certifications
GOST
Quality labels
CEBEC KEMA IMQ NF VDE
Noise level
60 dB
IP degree of protection
IP20 conforming to IEC 60529 (on opening) IP40 conforming to IEC 60529 (in enclosure)
Pollution degree
3
Tropicalisation
2
Relative humidity
95 % at 55 °C
Ambient air temperature for operation
-20…50 °C
Ambient air temperature for storage
-40…70 °C
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
1.800 cm
Package 1 Width
7.200 cm
Package 1 Length
8.500 cm
Package 1 Weight
102.000 g
Unit Type of Package 2
BB1
Number of Units in Package 2
12
Package 2 Height
8.500 cm
Package 2 Width
9.400 cm
Package 2 Length
22.300 cm
Package 2 Weight
1.276 kg
Unit Type of Package 3
S03
Number of Units in Package 3
144
Package 3 Height
30.000 cm
Package 3 Width
30.000 cm
Package 3 Length
40.000 cm
Package 3 Weight
15.954 kg
Warranty
18 months