Article number:

SK 3313.460

Design

Suite cooling

Benefits

Maximum energy efficiency due to EC fan technology and IT-based control

Applications

Ideal for IT cooling of small and medium-sized locations

Function principle

The LCP is designed for siting within a bayed enclosure suite. Hot air is drawn in from the aisle at the rear of the device, cooled by the high-capacity compact impellers, and blown back into the room or cold aisle after cooling.

Material

Sheet steel, spray-finished

Colour

RAL 7035

Options

Humidifier

Dehumidification and reheater

Condensate drain pump

Low-temperature/high-temperature condenser (-40 °C/+53 °C)

Monitoring

Direct connection of the unit via SNMP over Ethernet

Modulation range

8 ‐ 35 kW

Total cooling output/Number of fan modules

35 kW/3

Air throughput (unimpeded air flow)

Air throughput at 50 Hz: 9,900 m³/h

Dimensions

Width: 600 mm

Height: 2,000 mm

Depth: 1,000 mm

To fit enclosure type

VX IT

Installation in bayed enclosure suite

Flush

Rated operating voltage

380 V - 480 V, 3~, 50 Hz/60 Hz

Rated current max.

At 50 Hz: 31.6 A

Max. cooling output

35 kW

Type of electrical connection

Connection clamp

Duty cycle

100 %

Cooling medium

Refrigerant

EC fan

Yes

SNMP card

Yes

Fans may be exchanged with the system operational

Yes

Temperature control

Linear fan control

Pre-fuse

Miniature circuit-breaker/fuse: 50 A

Operating temperature range

5 °C...35 °C

Noise level

At 50 Hz: 68 dB(A)

Protection category to IEC 60 529

IP 20

Packs of

1 pc(s).

Weight/pack

398 kg

Customs tariff number

84195080

EAN

4028177953970

ETIM 7.0

EC002515

ECLASS 8.0

27180712