Trade Price
£200.62
Per
1
Unit
EA
Pack Quantity
1
This voltage/current converter is part of the range of interfaces Harmony Analog. This cost effective converter converts a 0…50 V, 0…300 V, 0…500 V AC/DC signal to a switchable 0…10 V, ± 10 V, 0…20 mA or 4…20 mA signal. Its supply voltage is 24V DC, isolated. It also allows the connection distance between a sensor and the measurement acquisition device to be increased. 0 0 It weighs 150g and its dimensions are, 25mm wide, 78mm high, 80mm deep. 0 0 Conforming to IEC standards, UL and CSA certified, this converter is suitable for universal use. 0 0 It can be mounted on 35mm DIN rail or fixed by screws on a mounting plate. 0 0 0
Range of product
Harmony Analog
Product or component type
Voltage/current converter
Analogue input type
Voltage 0...300 V AC/DC 50/60 Hz Voltage 0...50 V AC/DC 50/60 Hz Voltage 0...500 V AC/DC 50/60 Hz
Analogue output type
Current 0...20 mA <= 500 Ohm switchable Current 4...20 mA <= 500 Ohm switchable Voltage 0...10 V >= 100 kOhm switchable
Protection type
Short-circuit protection on output Reverse polarity protection on output Overvoltage protection on output (+/- 30 V)
abnormal analogue output voltage
-15...0 V no input or input wire broken
abnormal analogue output current
-30…0 mA, output selected 0...20 mA no input or input wire broken 4…30 mA, output selected 4...20 mA no input or input wire broken
[Us] rated supply voltage
24 V DC +/- 20 %, isolated
Current consumption
<= 70 mA for voltage output <= 90 mA for current output
Local signalling
LED (green) for power ON
Measurement error
+/- 10 % of full scale at 20 °C (electromagnetic interference of 10 V/m) +/- 5 % of full scale at 20 °C
Repeat accuracy
+/- 0.2 % full scale at 20 °C +/- 0.6 % full scale at 60 °C
Temperature coefficient
200 ppm/°C
Clamping connection capacity
1 x 2.5 mm² 2 x 1.5 mm²
tightening torque
0.6…1.1 N.m
Marking
CE
Surge withstand
0.5 kV during 1.2/50 µs conforming to IEC 61000-4-5
[Ui] rated insulation voltage
2 kV
Fixing mode
By screws (mounting plate) Clip-on (35 mm symmetrical DIN rail)
Safety reliability data
MTTFd = 21.6 years B10d = 20000
Net weight
0.15 kg
standards
IEC 60584-1 IEC 60947-1
product certifications
UL GL CSA
IP degree of protection
IP20 (terminal block) IP50 (housing)
Fire resistance
850 °C conforming to IEC 60695-2-1 850 °C conforming to UL
Shock resistance
50 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance
5 gn (f= 10…100 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge
6 kV (in contact) conforming to IEC 61000-4-2 level 3 8 kV (in air) conforming to IEC 61000-4-2 level 3
Resistance to fast transients
1 kV (on input-output) conforming to IEC 61000-4-4 2 kV (on power supply) conforming to IEC 61000-4-4
Disturbance radiated/conducted
CISPR 11 CISPR 22 group 1 - class B
Ambient air temperature for storage
-40…85 °C
Ambient air temperature for operation
0…50 °C mounting side by side 0…60 °C 2 cm spacing
Pollution degree
2 conforming to IEC 60664-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2.7 cm
Package 1 Width
8.5 cm
Package 1 Length
8.2 cm
Package 1 Weight
115.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
47
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
6.07 kg
Unit Type of Package 3
P06
Number of Units in Package 3
752
Package 3 Height
75 cm
Package 3 Width
60 cm
Package 3 Length
80 cm
Package 3 Weight
105 kg
Warranty
18 months
Datasheet
Technical Data