LULC033
MODBUS COMMUNICATION MODULE 2 IN
Trade Price
£136.07
Per
1
Unit
EA
Pack Quantity
1
Information
TeSys U communication module for Modbus, to be inserted in advanced power bases LUB120, LUB320, LUB380 equipped with a BL type (24V DC) LUC control unit. It provides a RJ45 connector for connection to a Modbus network, a plug-in terminal block for the connection to an external power supply 24V DC, in addition with 2 x configurable logic inputs 24V DC and 1 x logic output 24V DC. On front side, a 3-point plug-in terminal block is provided for the local control of the starter controller, to be associated with a control terminal block LU9BN11C for a LUB base or LU9MRC for a LU2B base. It displays 3 LEDs indicating 24V voltage presence (24V=) and communication status (COMM, ERR). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
Technical Specifications
Range
TeSys
Device short name
LUL
Product or component type
Communication module
Product compatibility
LUCL LUCC LUCB LUCM LUCA LUCD
Device application
Communication
Range compatibility
TeSys (TeSys U) LUB non reversing power base TeSys (TeSys U) LU2B reversing power base
main function available
Communication module
Mounting mode
Plug-in
Mounting location
Front side
Physical interface
RS485 multidrop
Bus type
Modbus
Cable connector type
RJ45 front panel
Communication port protocol
Modbus RTU
Addressing
0...31
Transmission rate
19200 bit/s
Return time
30 ms
Number of inputs
2
Logic input
Positive at 24 V DC - 7 mA
Response time
10 ms +/- 30 % change to state 0 10 ms +/- 30 % change to state 1
input type
Resistive
Number of outputs
2 dedicated to starter-controller coil operation 1
[Us] rated supply voltage
24 V DC
Number output current
<= 500 mA
Protection type
GG fuse 1 A
Switching current capacity
0.5 mA at 24 V
Local signalling
3 LEDs front panel
Connection pitch
3.81 mm
Connections - terminals
Screw clamp terminals 1 cable(s) 0.14…1 mm²flexible without cable end Screw clamp terminals 1 cable(s) 0.14…1 mm²rigid without cable end Screw clamp terminals 1 cable(s) 0.25…0.5 mm²flexible with cable end Screw clamp terminals 1 cable(s) 0.25…1 mm²flexible with cable end Screw clamp terminals 2 cable(s) 0.14…0.5 mm²rigid without cable end Screw clamp terminals 2 cable(s) 0.14…0.75 mm²flexible without cable end Screw clamp terminals 2 cable(s) 0.25…0.34 mm²flexible with cable end Screw clamp terminals 2 cable(s) 0.5 mm²flexible with cable end
Associated cable type
AWG 26...AWG 16
Tightening torque
0.2…0.25 N.m2.5 mm
Net weight
0.08 kg
Ambient air temperature for operation
-25…55 °C
IP degree of protection
IP20 conforming to IEC 60529
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
4.9 cm
Package 1 Width
11.3 cm
Package 1 Length
4.9 cm
Package 1 Weight
85.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
35
Package 2 Height
15.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
3.293 kg
Warranty
18 months
Document Links
Datasheet