Range of produc

Preventa Safety automation

Product or component type

Preventa safety module

safety module name

XPSVNE

safety module application

For zero speed detection

function of module

Monitoring XPS AK Monitoring 3-phase motor with variable number of poles and star-delta starting Monitoring 3-phase motor with star-delta starting Monitoring 3-phase motor + variable speed drive Monitoring star-delta motor starter and guard switch type XCS E Monitoring 3-phase motor Monitoring dc motor

Safety level

Can reach PL d/category 3 conforming to EN/ISO 13849-1 Can reach SILCL 2 conforming to EN/IEC 62061

Safety reliability data

MTTFd = 124.1 years conforming to EN/ISO 13849-1 DC > 99 % conforming to EN/ISO 13849-1 PFHd = 9.26E-9 1/h conforming to EN/IEC 62061

product certifications

UL CSA TÜV

[Us] rated supply voltage

115 V AC - 15...15 %

Output type

Relay, 1 NO + 1 NC circuit(s), volt-free

number of additional circuits

2 solid state outputs

Product destination

For motor power supply <= 60 Hz

Power consumption in VA

7.5 VA

Input voltage

500 Vrms

Input detection threshold

0.01...0.1 V

Breaking capacity

1.2 A at 24 V (DC-13) time constant: 50 ms for NC relay output circuit 1.5 A at 24 V (DC-13) time constant: 50 ms for NO relay output circuit 10 mA at 48 V for solid state output circuit 20 mA at 24 V for solid state output circuit

[Ith] conventional free air thermal current

2.5 A for relay output

Associated fuse rating

4 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Standards

EN/IEC 60947-5-1 EN/IEC 60204-1

Minimum output current

10 mA for relay output

Minimum output voltage

17 V for relay output

[Ui] rated insulation voltage

300 V (pollution degree 2) conforming to IEC 60947-5-1 300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2

[Uimp] rated impulse withstand voltage

4 kV overvoltage category III conforming to IEC 60947-5-1 4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2

Local signalling

4 LEDs

Connections - terminals

Captive screw clamp terminals, removable terminal block flexible cable: 0.2...1.5 mm² without cable end, 2 wires Captive screw clamp terminals, removable terminal block flexible cable: 0.2...2.5 mm² without cable end, 1 wire Captive screw clamp terminals, removable terminal block flexible cable: 0.25...1 mm² with cable end, without bezel, 2 wires Captive screw clamp terminals, removable terminal block flexible cable: 0.25...2.5 mm² with cable end, with bezel, 1 wire Captive screw clamp terminals, removable terminal block flexible cable: 0.25...2.5 mm² with cable end, without bezel, 1 wire Captive screw clamp terminals, removable terminal block flexible cable: 0.5...1.5 mm² with cable end, with double bezel, 2 wires Captive screw clamp terminals, removable terminal block solid cable: 0.2...1 mm² without cable end, 2 wires Captive screw clamp terminals, removable terminal block solid cable: 0.2...2.5 mm² without cable end, 1 wire

mounting support

35 mm symmetrical DIN rail

Depth

114 mm

height

99 mm

Width

45 mm

Net weight

0.6 kg

IP degree of protection

IP20 (terminals) conforming to EN/IEC 60529 IP40 (enclosure) conforming to EN/IEC 60529

ambient air temperature for operation

-10…55 °C

Ambient air temperature for storage

-25…85 °C

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

10.5 cm

Package 1 Width

12.5 cm

Package 1 Length

6.5 cm

Package 1 Weight

380.0 g

Unit Type of Package 2

S02

Number of Units in Package 2

12

Package 2 Height

15.0 cm

Package 2 Width

30.0 cm

Package 2 Length

40.0 cm

Package 2 Weight

5.015 kg

Warranty

18 months