Range of produc

Preventa Safety automation

Product or component type

Preventa safety module

safety module name

XPSVNE

safety module application

For zero speed detection

function of module

Monitoring star-delta motor starter and guard switch type XCS E Monitoring 3-phase motor with star-delta starting Monitoring 3-phase motor with variable number of poles and star-delta starting Monitoring 3-phase motor + variable speed drive Monitoring XPS AK Monitoring dc motor Monitoring 3-phase motor

Safety level

Can reach PL d/category 3 conforming to EN/ISO 13849-1 Can reach SILCL 2 conforming to EN/IEC 62061

Safety reliability data

MTTFd = 124.1 years conforming to EN/ISO 13849-1 DC > 99 % conforming to EN/ISO 13849-1 PFHd = 9.26E-9 1/h conforming to EN/IEC 62061

product certifications

UL CSA TÜV

[Us] rated supply voltage

230 V AC - 15...10 %

Output type

Relay, 1 NO + 1 NC circuit(s), volt-free

number of additional circuits

2 solid state outputs

Product destination

For motor power supply > 60 Hz

Power consumption in VA

7 VA

Input voltage

500 Vrms

Input detection threshold

0.01...0.1 V

Breaking capacity

1.2 A at 24 V (DC-13) time constant: 50 ms for NC relay output circuit 1.5 A at 24 V (DC-13) time constant: 50 ms for NO relay output circuit 10 mA at 48 V for solid state output circuit 20 mA at 24 V for solid state output circuit

[Ith] conventional free air thermal current

2.5 A for relay output

Associated fuse rating

4 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Standards

EN/IEC 60947-5-1 EN/IEC 60204-1

Minimum output current

10 mA for relay output

Minimum output voltage

17 V for relay output

[Ui] rated insulation voltage

300 V (pollution degree 2) conforming to IEC 60947-5-1 300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2

[Uimp] rated impulse withstand voltage

4 kV overvoltage category III conforming to IEC 60947-5-1 4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2

Local signalling

4 LEDs

Connections - terminals

Captive screw clamp terminals, removable terminal block flexible cable: 0.2...1.5 mm² without cable end, 2 wires Captive screw clamp terminals, removable terminal block flexible cable: 0.2...2.5 mm² without cable end, 1 wire Captive screw clamp terminals, removable terminal block flexible cable: 0.25...1 mm² with cable end, without bezel, 2 wires Captive screw clamp terminals, removable terminal block flexible cable: 0.25...2.5 mm² with cable end, with bezel, 1 wire Captive screw clamp terminals, removable terminal block flexible cable: 0.25...2.5 mm² with cable end, without bezel, 1 wire Captive screw clamp terminals, removable terminal block flexible cable: 0.5...1.5 mm² with cable end, with double bezel, 2 wires Captive screw clamp terminals, removable terminal block solid cable: 0.2...1 mm² without cable end, 2 wires Captive screw clamp terminals, removable terminal block solid cable: 0.2...2.5 mm² without cable end, 1 wire

mounting support

35 mm symmetrical DIN rail

Depth

114 mm

height

99 mm

Width

45 mm

Net weight

0.6 kg

IP degree of protection

IP20 (terminals) conforming to EN/IEC 60529 IP40 (enclosure) conforming to EN/IEC 60529

ambient air temperature for operation

-10…55 °C

Ambient air temperature for storage

-25…85 °C

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

12.5 cm

Package 1 Width

6.3 cm

Package 1 Length

10.5 cm

Package 1 Weight

390.0 g

Unit Type of Package 2

S02

Number of Units in Package 2

11

Package 2 Height

15.0 cm

Package 2 Width

30.0 cm

Package 2 Length

40.0 cm

Package 2 Weight

4.737 kg

Warranty

18 months