VW3A3407
INTERFACE CARD FOR 24V PUSH PULL
Trade Price
£143.59
Per
1
Unit
EA
Pack Quantity
1
Information
This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with push-pull outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.
Technical Specifications
Range of product
Altivar
Product or component type
Encoder interface card
range compatibility
Altivar 61Q Altivar 71Q Altivar 71 Altivar 61 Altivar Lift
Discrete output type
Push-pull
[Us] rated supply voltage
24 V DC (voltage limits: 20…30 V)
Number of pulses per revolution
10000 for ATV71H......383 5000 for all ATV61 drives 5000 for ATV71H...M3 5000 for ATV71H...M3X 5000 for ATV71H...N4
Maximum supply current
0.175 A
Protection type
Overload protection Short-circuit protection
Maximum cable distance between devices
500 m
Maximum operating frequency
300 kHz
Input signal
A B Compliment of A Compliment of B/AB/A
Input impedance
1000 Ohm
Voltage state 0 guaranteed
<= 1.5 V
Voltage state 1 guaranteed
> 11.5...< 25 V
Electrical connection
Terminal, connection capacity: 0.2 mm² (AWG 24) <500 m cable length, encoder, 100 mA at 14 V
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.500 cm
Package 1 Width
17.000 cm
Package 1 Length
23.000 cm
Package 1 Weight
142.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
7
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
1.503 kg
Warranty
18 months
Document Links
Datasheet