Product or component type

Extended I/O card

range compatibility

Altivar 61Q Altivar Lift Altivar 71Q Altivar 71 Altivar 61

Supply

Internal supply for reference potentiometer, 10.5 V DC (10…11 V) , <0.01 A, impedance: 1…10 kOhm for overload and short-circuit protection Internal supply, 24 V DC (21…27 V) , <0.2 A for overload and short-circuit protection

analogue input number

2

Analogue input type

AI3-/Al3+ differential current programmable: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution: 11 bits + sign AI4 software-configurable current: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution: 11 bits AI4 software-configurable voltage: 0...10 V DC, 24 V max, impedance: 30000 Ohm, sampling time: 4…6 ms, resolution: 11 bits

analogue output number

2

Analogue output type

AO2 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms, resolution: 10 bits AO2 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms, resolution: 10 bits AO3 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms, resolution: 10 bits AO3 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms, resolution: 10 bits

Discrete output number

5

Discrete output type

(LO3, LO4) assignable logic, sampling time: 4…6 ms, compatible with level 1 PLC (R4A, R4B, R4C) configurable relay logic

Discrete output logic

(LO3, LO4) negative (LO3, LO4) positive

Discrete input number

6

Discrete input type

(RP) frequency control, sampling time: 4…6 ms (LI11...LI14) programmable, compatible with level 1 PLC, impedance: 3.5 kOhm, sampling time: 4…6 ms

Discrete input logic

Negative (LI11...LI14), >= 16 V (state 0), <= 10 V (state 1) Positive (LI11...LI14), <= 5 V (state 0), >= 11 V (state 1) Positive (RP), < 1.2 V (state 0), >= 3.5 V (state 1)

Electrical durability

100000 cycles for configurable relay logic

Discrete output voltage

24 V DC (voltage limits: <= 30 V) assignable logic

Maximum output current

0.2 A, assignable logic

Minimum switching current

3 mA at 24 V DC for configurable relay logic

Maximum switching current

Configurable relay logic 5 A at 250 V AC on resistive load, cos phi = 1 Configurable relay logic 5 A at 30 V DC on resistive load, cos phi = 1 Configurable relay logic 1.5 A at 250 V AC on inductive load, cos phi = 0.4 and L/R = 7 ms Configurable relay logic 1.5 A at 30 V DC on inductive load, cos phi = 0.4 and L/R = 7 ms

PTC probe input

TH2+, TH2- trip resistance, impedance: 3 kOhm TH2+, TH2- reset resistance, impedance: 1.8 Ohm TH2+, TH2- short circuit protection, impedance: < 0.05 Ohm TH2+, TH2- for 6 PTC probe, impedance: <= 1.5 Ohm

Discrete input voltage

24 V DC (voltage limits: <= 30 V) for programmable

Discrete input frequency

0...30 kHz frequency control

Electrical connection

Terminal, 1.5 mm² / AWG 16, 0.25 N.m

Net weight

0.3 kg

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

7.000 cm

Package 1 Width

17.000 cm

Package 1 Length

23.000 cm

Package 1 Weight

382.000 g

Unit Type of Package 2

S03

Number of Units in Package 2

7

Package 2 Height

30.000 cm

Package 2 Width

30.000 cm

Package 2 Length

40.000 cm

Package 2 Weight

3.208 kg

Warranty

18 months