STBACI1225K
ANA C IN 2CHBASIC4-20A KIT
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 2 analogue inputs (current 4mA to 20mA) with 10bit resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 30mA at 5V DC for logic bus. The response time is 5ms. It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height). It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBXTS1100, 6-terminal screw type connector, STBXBA1000 base, STBXTS2100, 6-terminal spring clamp connector and STBACI1225 module. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
Technical Specifications
Range of product
Modicon STB distributed I/O solution
Product or component type
Basic analog input kit
Kit composition
STBXTS1100, 6-terminal screw type connector STBXBA1000 base STBXTS2100, 6-terminal spring clamp connector STBACI1225 module
Analogue input type
Current 4...20 mA
analogue input number
2
analogue input resolution
10 bits
Type of filter
Single low pass input filter 25 Hz
Absolute maximum input
25 mA/50 V DC
Response time
5 ms
Cold swapping
Yes
Hot swapping fallback
No for basic NIMs
Data format
EN 61131-2 IEC 61131-2
Update time
10 ms
Integral linearity
+/- 0.2 %FS
Differential linearity
Monotonic
Input impedance
<= 300 Ohm
Maximum supply current for sensors
100 mA per input channels
Absolute accuracy error
+/- 0.5 % of full scale 25 °C
Temperature drift
+/-0.01 %/°C
Insulation between channels and logic bus
1500 V for 1 minute
Insulation between channels and sensor bus
30 V
Addressing requirement
2 input words
Product compatibility
Mounting base STBXBA1000 Power distribution module STBPDT3100/3105
[Us] rated supply voltage
24 V DC
Supply
Power distribution module
Current consumption
30 mA at 5 V DC for logic bus
Marking
CE
Overvoltage category
II
Status LED
1 LED (green) module status (RDY)
Depth
70 mm
height
13.9 mm
Width
128.3 mm
product certifications
C-Tick UL CSA FM Class 1 Division 2 ATEX Cat 3G
Pollution degree
2 conforming to IEC 60664-1
Operating altitude
<= 2000 m
IP degree of protection
IP20 conforming to IEC 61131-2 class 1
Ambient air temperature for operation
32...140 °F without derating
Ambient air temperature for storage
-40...185 °F without derating
Relative humidity
95 % at 60 °C without condensation
Vibration resistance
+/-0.35 mm at 10…58 Hz 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail
Shock resistance
30 gn for 11 ms conforming to IEC 88 reference 2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2.79 cm
Package 1 Width
8.13 cm
Package 1 Length
13.21 cm
Package 1 Weight
140 g
Unit Type of Package 2
S02
Number of Units in Package 2
28
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
4.262 kg
Unit Type of Package 3
P06
Number of Units in Package 3
448
Package 3 Height
75.0 cm
Package 3 Width
40.0 cm
Package 3 Length
80.0 cm
Package 3 Weight
85.928 kg
Warranty
18 months