STBACI0320K
ANA C IN 4CH,4-20MA KIT
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 4 analogue inputs (current 0mA to 20mA) with 15bit plus sign resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 95mA at 5V DC for logic bus. It supports hot swap fallback, requires standard type network interface module (NIM). It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 18.4mm (height). It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA2000 and power distribution module STBPDT3100/3105. The kit includes STBXTS2100, 6-terminal spring clamp connector, STBXTS1100, 6-terminal screw type connector, STBXBA2000 base and STBACI0320 module. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
Technical Specifications
Range of product
Modicon STB distributed I/O solution
Product or component type
Standard analog input kit
Kit composition
STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector STBXBA2000 base STBACI0320 module
Analogue input type
Current 0...20 mA Current 4...20 mA
analogue input number
4
analogue input resolution
15 bits + sign
Type of filter
Single low pass input filter 985 Hz
Absolute maximum input
25 mA/50 V DC
Cold swapping
Yes
Hot swapping fallback
Yes for standard NIMs
Fallback status
State 0 basic NIMs User configurable standard NIMs
Data format
IEC 61131-2 EN 61131-2
Update time
10 ms
Integral linearity
+/- 0.05 %FS
Input impedance
250 Ohm
Maximum supply current for sensors
25 mA per input channels
Protection type
Short-circuit protection
Absolute accuracy error
+/- 0.4 % of full scale 25 °C
Temperature drift
+/-0.005 %/°C
Insulation between channels and logic bus
1780 V for 1 minute
Insulation between channels and sensor bus
200 V
Addressing requirement
8 input words
Product compatibility
Mounting base STBXBA2000 Power distribution module STBPDT3100/3105
[Us] rated supply voltage
24 V DC
Supply
Power distribution module
Current consumption
95 mA at 5 V DC for logic bus
Marking
CE
Overvoltage category
II
Status LED
1 LED (green) module status (RDY) 1 LED (red) module error (ERR)
Depth
70 mm
height
18.4 mm
Width
128.3 mm
product certifications
CSA UL FM Class 1 Division 2 ATEX Cat 3G C-Tick
Pollution degree
2 conforming to IEC 60664-1
Operating altitude
<= 2000 m
IP degree of protection
IP20 conforming to IEC 61131-2 class 1
Ambient air temperature for operation
32...140 °F without derating
Ambient air temperature for storage
-40...185 °F without derating
Relative humidity
95 % at 60 °C without condensation
Vibration resistance
+/-0.35 mm at 10…58 Hz 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail
Shock resistance
30 gn for 11 ms conforming to IEC 88 reference 2-27
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
2.7 cm
Package 1 Width
13.0 cm
Package 1 Length
8.0 cm
Package 1 Weight
146.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
28
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
4.514 kg
Warranty
18 months