ABE7R16S210
TF2 16CH OP VF5A NO C LED
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with soldered electromechanical relay, provides 16 channels. It has normally opened contact for pre-actuator. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 24V DC and a maximum current of 10A per output. It offers electrical durability about 500000 operating cycles. It is an IP2x rated product. Its dimension is 206mm (Width). It weighs 0.405kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Technical Specifications
Range of product
Modicon ABE7
Product or component type
Electromechanical output relay sub-base
[Us] rated supply voltage
24 V DC for PLC end
Number of channels
16
Number of terminal per channel
2
Terminal block type
Removable
Polarity distribution
Volt-free
Fixing mode
By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit)
Maximum current per output common
10 A
Current per channel
5 A for preactuator end
Minimum switching current
10 mA at >= 5 V
Drop-out voltage
2.4 V at 20 °C (PLC end)
Switching frequency
<= 0.5 Hz <= 10 Hz
Threshold tripping voltage
19.7 V at 40 °C
Drop-out current
1 mA at 20 °C
Maximum power dissipation per channel in W
0.36 W (PLC end)
Contacts type and composition
1 NO for preactuator end
Maximum switching voltage
250 V AC 50/60 Hz conforming to IEC 60947-5-1 30 V DC conforming to IEC 60947-5-1
Electrical durability
500000 cycles, maximum switching current: 600 mA at 24 V DC-13 10 ms (preactuator end) 500000 cycles, maximum switching current: 1500 mA at 230 V AC-12 (preactuator end) 500000 cycles, maximum switching current: 1500 mA at 24 V DC-12 (preactuator end) 500000 cycles, maximum switching current: 900 mA at 230 V AC-15 (preactuator end)
Electrical reliability
1e-008
Operating time
<= 10 ms coil energisation and NO closing <= 5 ms coil de-energisation and NO opening
Contact bounce time
<= 5 ms 1 NO
Operating rate in Hz
10 Hz no load 0.5 Hz at Ie
Mechanical durability
20000000 cycles
[Uimp] rated impulse withstand voltage
2.5 kV conforming to IEC 60947-1
[Ui] rated insulation voltage
2000 V
Installation category
II conforming to IEC 60664-1
Tightening torque
0.6 N.m with flat Ø 3.5 mm screwdriver
Width
206 mm
Net weight
0.405 kg
Max immunity to microbreaks
5 ms
Dielectric strength
2000 V conforming to IEC 60947-1
product certifications
GL CSA DNV UL EAC
IP degree of protection
IP2X conforming to IEC 60529
Protective treatment
TC
Resistance to incandescent wire
750 °C, extinction time <30 s conforming to IEC 60695-2-11
Shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
Resistance to radiated fields
10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients
2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation
-5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage
-40…80 °C conforming to IEC 61131-2
Pollution degree
2 conforming to IEC 60664-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
7.000 cm
Package 1 Width
8.200 cm
Package 1 Length
21.100 cm
Package 1 Weight
581.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
15
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
9.103 kg
Warranty
18 months