ABE7P16T334
O/ SUB BASE FOR 16 REMOV. REL.
Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
Information
This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This sub-base for plug-in relay, provides 16 channels. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. It weighs 0.9kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABS7A3M, ABE7ACC21, ABS7SC3E and ABR7S33 plug-in relay. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
Technical Specifications
Range of product
Modicon ABE7
Product or component type
Sub-base for plug-in relay
Sub-base type
Output sub-base
[Us] rated supply voltage
19...30 V conforming to IEC 61131-2
Number of channels
16
Connections - terminals
Screw type terminals, 1 x 0.09...1 x 1.5 mm² (AWG 28...AWG 16) flexible with cable end Screw type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 12) solid Screw type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 14) flexible without cable end Screw type terminals, 2 x 0.09...2 x 0.75 mm² (AWG 28...AWG 20) flexible with cable end Screw type terminals, 2 x 0.2...2 x 2.5 mm² (AWG 24...AWG 14) solid
supply voltage type
DC
Product compatibility
ABS7A3M ABE7ACC21 ABS7SC3E ABR7S33 ABS7SC3..
Status LED
1 LED per channel (green) channel status 1 LED (green) power ON
Polarity distribution
Volt-free
Short-circuit protection
1 A internal fuse, 5 x 20 mm, fast blow (PLC end) 2 A fuse per channel, 5 x 20 mm, fast blow (output circuit)
Fixing mode
By clips (35 mm symmetrical DIN rail) By screws (solid plate with fixing kit)
Maximum supply current
1 A
Voltage drop on power supply fuse
0.3 V
Maximum current per output common
16 A
[Ui] rated insulation voltage
300 V coil circuit/contact circuits conforming to IEC 60947-1 2000 V terminals/mounting rails
[Uimp] rated impulse withstand voltage
2.5 kV
Installation category
II conforming to IEC 60664-1
Tightening torque
0.6 N.m with flat Ø 3.5 mm screwdriver
Net weight
0.9 kg
product certifications
CSA DNV UL GL EAC
IP degree of protection
IP2X conforming to IEC 60529
Resistance to incandescent wire
750 °C, extinction time <30 s conforming to IEC 60695-2-11
Shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance
2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6
Resistance to electrostatic discharge
4 kV (contact) level 3 conforming to IEC 61000-4-2 8 kV (air) level 3 conforming to IEC 61000-4-2
Resistance to radiated fields
10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients
2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation
-5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage
-40…80 °C conforming to IEC 61131-2
Pollution degree
2 conforming to IEC 60664-1
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
8.5 cm
Package 1 Width
10.0 cm
Package 1 Length
29.3 cm
Package 1 Weight
870.0 g
Unit Type of Package 2
S03
Number of Units in Package 2
6
Package 2 Height
30.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
5.678 kg
Warranty
18 months