Trade Price
POA
Per
1
Unit
EA
Pack Quantity
1
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This discrete output module has 16 outputs with sink (positive) logic. It is a discrete output module with an output voltage of 24V, 19V DC to 30V DC, a maximum power dissipation of 4W, a typical current consumption 79mA at 3.3V DC and 0.6A current per channel. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. Protection types are reverse polarity protection, external short-circuit protection, overload protection and overvoltage protection. It offers 392285 hours of MTBF. It is an IP20 rated product. It weighs 0.12kg. It is suitable for severe environments, medium to large process applications. This product is certified by IEC-Ex, ATEX, EAC, Merchant Navy, CSA, RCM, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
Range of product
Modicon X80
Product or component type
Discrete output module
Product specific application
For severe environments
Discrete output number
16 conforming to EN/IEC 61131-2
Discrete output type
Solid state
discrete output logic
Positive
Discrete output voltage
24 V 19...30 V DC
discrete output current
0.5 A
Current per channel
0.625 A
Maximum current per module
10 A
Maximum leakage current
0.5 mA at state 0
Maximum voltage drop
<1.2 V at state 1
Insulation resistance
> 10 MOhm 500 V DC
Power dissipation in W
4 W
Response time on output
1.2 ms
Paralleling of outputs
Yes : 2 maximum
Typical current consumption
79 mA at 3.3 V DC
MTBF reliability
410000 H
Protection type
External fuse reverse polarity protection short-circuit protection overload protection overvoltage protection
Output overload protection
With electronic circuit breaker 1.5 In < Id < 2 In With current limiter
Output overvoltage protection
With transil diode
Output short-circuit protection
With 2 A external fuse
Reverse polarity protection
Reverse mounted diode
Voltage detection threshold
< 14 V DC preactuator fault > 18 V DC preactuator at state 0
Maximum tungsten load
6 W
Switching frequency
0.5/LI² Hz
Load impedance ohmic
> 48 Ohm
Status LED
1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O
Net weight
0.12 kg
IP degree of protection
IP20
Directives
2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Environmental characteristic
Gas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2
Dielectric strength
1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic
Vibration resistance
3 gn
Shock resistance
30 gn
Ambient air temperature for storage
-40…85 °C
Ambient air temperature for operation
-25…70 °C
Relative humidity
5…95 % at 55 °C without condensation
Protective treatment
Conformal coating
Operating altitude
0...2000 m 2000...5000 m with derating factor
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.5 cm
Package 1 Width
11.0 cm
Package 1 Length
11.5 cm
Package 1 Weight
171.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
15
Package 2 Height
15 cm
Package 2 Width
30 cm
Package 2 Length
40 cm
Package 2 Weight
2.991 kg
Unit Type of Package 3
P06
Number of Units in Package 3
240
Package 3 Height
75.0 cm
Package 3 Width
60.0 cm
Package 3 Length
80.0 cm
Package 3 Weight
59 kg
Warranty
18 months
Datasheet
Product Catalogue