58000-400APO
Apollo Discovery Heat Detector
Trade Price
£65.09
Per
1
Unit
EACH
Pack Quantity
Information
A high specification programmable heat detector. Fully compatible with C-TEC’s XFP & ZFP XP95/Discovery Addressable Fire Panels. User programmable to operate in one of five sensivity modes (e.g. Mode 1 will give a higher senstivity to fire than Mode 5). Uses a single thermistor to sense the air at the detector position. Ideal in environments that are dirty or smoky under normal conditions such as warehouses, loading bays and car parks. Remote test feature. Red LED illuminates when the detector is in alarm. Certified to EN54-5 by the LPCB. Requires a 45681-210APO standard base or 45681-242APO low power relay base. ‘Xpert’ card addressed for speedy installation.
Technical Specifications
Approvals/certifications
Certified to EN54-5 by the LPCB.
Compatibility
Compatible with C-TEC's XFP/ZFP XP95/Discovery Addressable Fire Panels.
Application/operation
Uses a single thermistor to sense the air temperature at the detector position. Provides a very good response in environments that are dirty or smoky in normal conditions.
Application temperature
n/a
Static response temperature
n/a
Sensitivity
Option to select 5 different operating modes at the fire panel. See Operation Modes tab below for details.
Supply wiring
2-wire, polarity insensitive.
Supply/operating voltage
17 to 28V DC.
Quiescent current
350µA.
Alarm current
3.4mA (LED illuminated).
Indicators
2 clear LEDs emitting red light when in alarm. Optional remote LED.
Connections
L1&L2 supply in/out; +R remote LED +Ve connection; -R remote LED -Ve connection. (5mA max. remote LED current @ 5V measured across remote load).
Product dimensions (mm)
100mm diameter x 42 mm H (not in base). 50mm height when in base.
Construction & finish
White polycarbonate UL94-VO. Nickel plated stainless steel terminals.
IP Rating
IP44.
Weight
105g (not in base); 160g (in base).
Operating conditions/temperature
-40ºC to +80ºC.
Notes
Requires a BF308XP standard base or BF308XPR low power relay base. 1mA power up surge current for 0.3 seconds.
Document Links
Datasheet