EVC302F
Brushed Stainless Steel Disabled Refuge Outstation, flush
Trade Price
£217.15
Per
1
Unit
EACH
Pack Quantity
Information
An attractive Type B disabled refuge outstation. Stylishly finished in high-guality, brushed stainless steel. Suitable for use with C-TEC’s SigTEL disabled refuge / emergency voice communication system. Allows anyone located in a disabled refuge area to communicate with a SigTEL Master Controller at the touch of a button (and vice versa). Offers true duplex speech. Features a ‘Push to Call or Answer’ button, a ‘Call in Progress’ LED, buzzer, microphone and loudspeaker. Includes connections for an optional induction loop system and a general-purpose open collector output that closes on activation of the unit. Meets and exceeds the requirements of BS 5839-9 when correctly installed.
Technical Specifications
Approvals/certifications
Facilitates compliance with BS5839-9 when correctly installed.
Supply/operating voltage
11V DC derived from a compatible SigTEL Master Controller (drops to 6 V DC when in use).
Quiescent current
3mA
Activation current
25mA (current draw when intercom is in use).
Open collector outputs
O/P +Ve & O/P –Ve (closes when outstation is active, typically used to trigger a third party CCTV camera, opto-isolated, normally open, max. 24 V DC, 3 mA).
Indicators
Red call in progress LED
Controls
External 'Push to Call or Answer' button (Off Hook); Internal Loudspeaker volume control; Engineer’s “On Hook” and “Off Hook” pins.
Expansion connections
AFILS +Ve & AFILS –Ve (typically connected to the line-level input of an optional induction loop amplifier): Off-Hook and -Ve (can be optionally connected to an NC951 accessible toilet alarm kit
Product dimensions (mm)
175 W x 250 H x 53 D mm. Hole required for flush mounting: 156 W x 232 H x 51mm D approx (no bezel required).
Construction & finish
Brushed stainless steel.
IP Rating
IP20.
Weight
1.5 kg.
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Notes
Microphone frequency response 250 Hz to 5 kHz ±3 dB; Loudspeaker frequency response 250 Hz to 4 kHz ±3 dB; Audio output level: 0 dB (775 mV) balanced line.
Product dimensions:
160 W x 240 H x 53 D mm. Designed for flush mounting only.
Hole required for flush mounting:
156 W x 232 H x 51mm D approx (no bezel required)
Document Links
Datasheet