QT637
Enuresis/General Purpose Interface Socket
Trade Price
£87.43
Per
1
Unit
EACH
Pack Quantity
Information
Allows bed wet sensors, floor pressure mats and bed/chair exit sensors to be easily interfaced to a Quantec addressable call system. Includes two 6.35mm remote jack sockets – one for use with a QT635 enuresis/bed wet sensor and one that will accept a floor pressure mat (QT644), bed exit mat (QT633) or chair exit mat (QT634). Onboard battery/isolation circuit ensures compliance with all relevant UK medical directives. Connects to Quantec via the ancillary input on a Quantec master call point or a QT630 dementia care controller. Can be programmed to generate a ‘standard’, ’help required’ or ‘emergency’ call on activation via a QT423 configurator at the master call point. Includes a battery test button and low battery/enuresis active indicators Supplied on a double gang plate typically located at floor level. Requires a PP3 battery.
Technical Specifications
Max battery size and type
Requires a PP3 battery (not supplied).
Alarm current
20mA.
Indicators
Enuresis Active (Flashes red every four seconds when the QT635 Bed Wet Sensor detects moisture); Low Battery (Flashes amber every four seconds when the battery is low).
Controls
TEST button (Press to confirm the enuresis circuitry is working (Enuresis Active indicator will illuminate red).
Connections
N-; L+; Fault; Enuresis; Bed Exit – see main instructions for wiring details.
Onboard 6.35mm Remote Jack Socket
Yes (x2). One for a Bed Wet Sensor (QT635) and one for a floor pressure mat (QT644), bed exit mat (QT633) or chair exit mat (QT634).
Product dimensions (mm)
146 W x 87 H x 33 D mm. Mount on a 35mm deep back box.
Construction & finish
Plastic.
IP Rating
IP20.
Weight
130g
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Product dimensions:
146 W x 87 H x 35 D mm. Mount on a standard UK 35mm deep double gang back box.
Document Links
Datasheet