NC802DB
Standard Call Point, Button Reset c/w Remote Socket
Trade Price
£29.42
Per
1
Unit
EACH
Pack Quantity
Information
An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device. Red reassurance LED confirms a call has been made. Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas). Mounts on a standard UK 25mm single gang flush or surface back box.
Technical Specifications
Quiescent current
0mA (none).
Alarm current
Determined by the type of control equipment and number / type of field devices connected to the system.
Indicators
Red Reassurance LED (lit constant for Standard calls).
Controls
Call button (generates Standard calls only); Reset button (cancels Standard calls from the NC802DB and Standard calls from other devices wired on the same Zone).
Connections
SIG (Signal); -Ve (Negative); RC (for the optional connection of an NC807C ceiling pull unit.
Expansion connections
Yes. For an optional NC807C ceiling pull unit.
Onboard Sounder
Yes. For optional tail call leads, floor pressure mats, air switches, etc.
Onboard Infrared Receiver
No.
Product dimensions (mm)
87 W x 87 H x 32 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish
Plastic.
IP Rating
IP20.
Weight
64g.
Operating conditions/temperature
-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Product dimensions:
87 W x 87 H x 24 D mm. Mounts on a 25mm UK single gang back box.
Document Links
Datasheet