Trade Price
£166.54
Per
1
Unit
EA
Pack Quantity
1
ClimaSys CV Axial motor ventilator. 24V DC 50Hz or 60Hz. 7.6W 50 Hz. Free flow rate with standard filter of 80 m3/h at 50 Hz. 170 x 150 x 62 mm. Cut-out dimensions of 125 x 125 mm. Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035. Connections terminals by cable. 2 protective grille on the front and rear surfaces. Protection IP54.
Range
ClimaSys
Product name
ClimaSys CV
Product or component type
Fan
Type of filter
Standard
Flow rate
Free flow rate with standard filter: 80 m3/h
[Us] rated supply voltage
10...27.6 V
Input voltage
24 V DC
Absorbed power
7.6 W
[In] rated current
0.3 A
Noise level < at
46…49 dB
Bearing type
Ball
Height
170 mm external:
Width
150 mm external:
Depth
62 mm external:
Cut-out dimensions
125 x 125 mm
Net weight
0.48 kg
Material
Outlet grille: injected thermoplastic (ASA PC)
Colour
Outlet grille: grey (RAL 7035)
Ambient air temperature for operation
-10…70 °C
Ambient air temperature for storage
-40…70 °C
Maximum pressure
50 Pa flow rate 0 m³/h
Connections - terminals
Cable
IP degree of protection
IP54
Device composition
1 axial motor 2 protective grille: on the front and rear surfaces 1 filter: front of axial motor 1 outlet grille: front 1 cut-out template 1 power cord
Condition of use
Overfrequent filter replacement should be avoided Outside temperature must be 5 °C lower than inside temperature Surrounding environment must be relatively clean Filter must be cleaned and replaced regularly Flow rates depends on the work point, see ProClima software
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
8.5 cm
Package 1 Width
15.5 cm
Package 1 Length
17.5 cm
Package 1 Weight
540 g
Unit Type of Package 2
PAM
Number of Units in Package 2
300
Package 2 Height
80 cm
Package 2 Width
100 cm
Package 2 Length
120 cm
Package 2 Weight
175 kg
Warranty
18 months