Product Length/Depth

150 mm

Product Height

80 mm

Product Width

210 mm

Product Weight

1.29 kg

Compliances

IEC

UL/CSA

RoHS conform

Certifications

UL (File No. E140305)

UL (Category Control Number DIHS)

CSA-C22.2 No. 5-09

CSA certified

UL489

CSA (File No. 22086)

IEC60947

CE marking

UL listed

CSA (Class No. 1437-01)

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Frame

NZM4

10.4 Clearances and creepage distances

Meets the product standard's requirements.

Suitable for

Power circuit breaker

Emergency stop

Switch disconnector

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

Locking facility

Lockable on the 0 position on the switch using up to 3 padlocks

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

Fitted with:

Padlock

Extension shaft

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

10.8 Connections for external conductors

Is the panel builder's responsibility.

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

Special features

Complete with rotary drive

Cannot be combined with insulating surround

MODAN handle position detection by wire release can be retrofitted

Makes it possible to operate the switch with a rotational movement and provides locking facilities

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

Color

Red

Degree of protection / NEMA enclosure type

IP20

4X. 12

Features

Red-yellow for emergency switching off

Lockable

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

Type

Accessory

Rotary handle on circuit-breaker

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard's requirements.

10.2.7 Inscriptions

Meets the product standard's requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

Used with

NZM4(-4), N(S)4(-4)

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.

Activation type

Rotary handle