Product Length/Depth

21 mm

Product Height

94 mm

Product Width

78 mm

Product Weight

0.12 kg

Compliances

IEC

RoHS conform

Certifications

IEC/EN 60947

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Frame

NZM1, N1, NZM2(-4), N2-(4)

NZM3(-4), N3-(4)

NZM4(-4), N4-(4)

Terminal equipment included

Screw connection

Accessory/spare part type

Auxiliary conductor plug and socket device

Accessory

Other

10.4 Clearances and creepage distances

Meets the product standard's requirements.

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Mounting Method

Plug-in unit

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

Ambient storage temperature - min

40 °C

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

Protection against direct contact

Finger and back-of-hand proof to VDE 0106 part 100

10.8 Connections for external conductors

Is the panel builder's responsibility.

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

Special features

Auxiliary conductor plug connector for use with plug-in units NZM...-SVE and plug-in socket NZM...-XSVS to disconnect the cables of the installed accessories

Ambient operating temperature - max

70 °C

Ambient storage temperature - max

70 °C

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

Climatic proofing

Damp heat, cyclic, to IEC 60068-2-30

Damp heat, constant, to IEC 60068-2-78

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

Number of poles

Three-pole/Four-pole

Ambient operating temperature - min

-25 °C

Type

Accessory. Auxiliary conductor plug device for plug technology

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard's requirements.

10.2.7 Inscriptions

Meets the product standard's requirements.

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

Mounting position

As required

Isolation

300 V AC (between the auxiliary contacts)

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Direction of incoming supply

As required

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.

Shock resistance

20 g (half-sinusoidal shock 20 ms)